Tools & Home Improvement From ZOOZ on Amazon

PREVENT WATER DAMAGE: Receive alerts on your phone when water is detected by the sensor once you include it to your Z-Wave hub (required, sold separately). Check below for compatibility. Pair with the Zooz Titan Water Valve actuator (sold separately) for a smart flood prevention system.

EXTRA SMALL: Place it under your appliances to monitor for leaks discreetly. It's OK if the device is splashed with water but it can't be fully submerged so keep that in mind when choosing the installation location.

MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.

4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click.

REMOTE CONTROL: Use the paddles like remote control buttons to trigger scenes and turn other smart home devices on or off. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.

ANYWHERE SWITCH: Install it in a regular switch box or stick it to any flat surface for convenient and wire-free control. This is a battery-powered device with a magnetic base that allows a flexible installation anywhere you always wanted another light switch (no electrician needed!).

WIRELESS BRIGHTNESS CONTROL: Turn your lights on or off and dim them with Z-Wave. Works with all of the LED's other dimmers flicker with (120 VAC only, no 0-10V control)! Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).

NEW 700 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. Each dimmer will act as a signal extender making your smart home mesh reliable. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!

VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.

DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!

SMART RGBW CONTROL: Change colors and hues, adjust brightness, and turn DC RGBW LED strips on or off from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Wink and Z-Wave alarm panels. Custom driver required for works with SmartThings, contact seller for details.

HOW IT WORKS: You'll need a 12 or 24 V DC (not AC!) power supply depending on your LED strip requirements to power both the strip (sold separately) and the RGBW Dimmer. Do NOT exceed 120 W total for 12 V DC strips or 240 W total for 24 V DC strips! Do NOT use with addressable LED strips. Add the RGBW Dimmer to your Z-Wave hub to get wireless control of your lighting. Program schedules, and create custom scenes (if this functionality is supported by your hub).

VERSATILE APPLICATION: Push-button control for garbage disposals. Can be used with Z-Wave dimmer modules for local dimming control (NOTE: THIS IS NOT A Z-WAVE DEVICE).

MOMENTARY CONTROL: Press and hold to trigger the motor in your garbage disposal, release to stop. Tap to turn on the light, press and hold to adjust brightness, tap again to turn off the light when using with a Z-Wave dimmer module.

POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!

POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption.

EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways.

2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB.

4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.

NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance.