Electronics From XYGStudy on Amazon

Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series

Using UART bus, easily converting UART to RS485, or vice versa

Supports Raspbian, 5-points touch, driver free

Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free

Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+*(CM3/3+ requires extra adapter board)

Incorporates SIM7600G-H global band 4G module, compatible with 2G/3G/4G network with global support

USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access

Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc

The Pico-BLE is a dual-mode Bluetooth 5.1 expansion module designed for Raspberry Pi Pico, which is controlled via UART AT commands, with SPP and BLE support. Combined with the Raspberry Pi Pico, it can be used for Bluetooth wireless communication applications.

Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series

Controlled via UART AT commands, get started quickly

Frequency range: 2400-2500/5100-5800 MHz. Bandwidth: 100–700MHz. VSWR: ≤ 2.0

Gain: 2 dBi. Impedance: 50 ohm. Polarisation: Vertical

Radiation: Omnidirectional. Maximum power: 10W. Antenna dimensions: 108 mm × 10 mm

1.4um x 1.4um pixel with OmniBSI technology, high sensitivity, low crosstalk, low noise

Automatic image control functions: AEC, AWB, ABF, ABLC, etc.

Image quality controls: color saturation, hue, gamma, sharpness, lens correction, etc.

This is a global band industrial grade 4G dongle, which features up to 150Mbps downlink rate and 50Mbps uplink rate, supports operating systems including Windows/Linux/Android. By simply connecting it to laptop, PC, Raspberry Pi, drone, industrial computer, or other IoT host device, it is easy to use 4G network connection on the go.

Supports 2G/3G/4G network connection, global band. Driver provided, for operating systems including Windows/Linux/Android. Supports network protocols such as TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS

Onboard USB port, for directly connecting with ARM/X86 hosts or other industrial computer. Onboard UART port with hardware flow control, for connecting with host boards like Arduino/STM32. Onboard GNSS connecting, supports GPS, Beidou, Glonass, LBS base station positioning (additional GNSS antenna is required but NOT included)

Standard Raspberry Pi 40PIN GPIO extension header, Compatible with Raspberry Pi 2B/3B/3B+/3A+/4B/Zero/Zero W/Zero WH and further versions

The LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz, Supports systems like Raspbian, Ubuntu MATE, OSMC...

Note: This item can be used for displaying ONLY, if touch panel is required, please consider 5inch HDMI Capacitive Touch LCD OR 5inch HDMI Resistive Touch LCD.

4K ultra-HD Transmission: 4Kp60 compliant, high picture quality, Clear display on big screen

High quality green PVC material, pliable & durable cable wrap, ensures stable signal transmission

Dedicated protective case ONLY for use with our 15.6inch FHD Monitor

Easy to install, Whole body wrapped protection

Folio cover stand, multi viewing angles, Nice and durable

8 megapixel IMX179 sensor, 3288x2512 resolution

USB interface, UVC protocol, driver-free, plug-and-play

Supports Raspberry Pi and Jetson Nano

Dual GigE 5G/4G Base inside to make it easy to build your own Raspberry Pi CM4 mini PC

Providing interfaces including: ETH/CSI/DSI/RTC/HDMI/Micro SD/USB/M.2 B KEY

Precise cut-out with clear label, each cut-out is completely aligned with the connector

Cooling fan included, comes with cooling fan, combined with the airflow vent, better heat dissipation

Compatible devices: Personal Computer

Supports all versions of Raspberry Pi: Raspbian, 10-points touch, driver free. Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Retropie, driver free

Supports Jetson Nano: Ubuntu, single point touch, driver free

Supports Tinker Board 2: Android / Debian. Supports PC: Windows 11 / 10 / 8.1 / 8 / 7, 10-points touch, driver free

The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The ST Zio connector, which is an extension of Arduino Uno, provides access to more peripherals and ST morpho headers make it easy to expand the functionality of the Nucleo open development platform with a wide choice of specialized shields.

The STM32 Nucleo-144 board does not require any separate probe, as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, as well as a direct access to the ARMmbedonline resources.

USB OTG or device full speed with Micro-AB connector (depending on STM32 support)

The BBC micro:bit, a pocket-sized (4cm×5cm) ARM development board designed for helping children to learn programming skills, is now updated to the new V2 version. You can use your BBC micro:bit for all sorts of cool creations including digital games, musical instruments, robots, scientific experiments, wearable devices, and more...

The micro:bit V2 adopts faster ARM Cortex-M4 nRF52833 processor, integrates 2.4G Radio/BLE Bluetooth 5.0, and now includes built-in MEMS microphone, speaker, and touch sensitive logo pin, enabling people to get creative more easily through sound and touch sensing.

It also offers 5x5 red LED matrix with separate control for each LED, and two programmable user buttons that can be used to control games or pause/skip songs on a playlist. The micro:bit V2 has a motion sensor which combines 3-axis sensing accelerometer, together with magnetometer that can be used as compass or magnetic field strength sensor.

SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/STM32

Comes with development resources (examples for Raspberry Pi/STM32)

Based on the STM32F407VGT6, it includes an ST-LINK/V2-A embedded debug tool, two ST MEMS, digital accelerometer and digital microphone, one audio DAC with integrated class D speaker driver, LEDs and push buttons and an USB OTG micro-AB connector.

STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package

If you've got a Jetson Nano on your desk right now, combined with our open source codes and tutorials, these add-ons would be the ideal choice for you to learn AI robot designing and development.

Dual Mode Wireless NIC AC8265: 2.4GHz / 5GHz Dual Mode WIFI + Bluetooth 4.2 High Speed WIFI Connectivity, Stable Bluetooth Communication, Low Latency

8MP 160° FOV Camera: IMX219 Sensor, 3280×2464 Resolution Facial Recognition, Object Classify, Real Time Monitoring

Supports all versions of Raspberry Pi: Raspbian, 10-points touch, driver free. Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Retropie, driver free

Supports Jetson Nano: Ubuntu, single point touch, driver free

Supports Tinker Board 2: Android / Debian. Supports PC: Windows 11 / 10 / 8.1 / 8 / 7, 10-points touch, driver free

By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.

Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Onboard CP2102 USB TO UART converter, for serial debugging. Brings the UART control interface, for connecting host boards like Arduino/STM32