Automotive From Xetron on Amazon

【Certificated by SAE-J1627 and EN14624 Standards】Stop false alarms from soap bubbles solution. CLD-100, an advanced version of WJL-6000. Continuous detection mode, instantly responding to all halogenated gases (including chlorine, fluorine, bromine): [CFCs: R12, R11, R500, R503 etc.] [HCFCs: R22, R123, R124, R502 etc.] [HFCs: R134a, R1234yf, R404a, R125, R438a etc.] [HFOs: R1234 etc.] [Hydrocarbon: R290, R600a etc.] [ Blends: AZ-50, HP62, MP39, R410a etc.]

【6 Modes of Sensitivity to Reach the Best Detection】20cm flexible sensing tip with max.sensitivity of 0.21oz/yr(6gr/yr). You can manipulate the probe into the way you want to go. It's powered by 4 AAA batteries with low Battery Warning.

【Replace Analog Gauges with Xetron Digital Manifold】offers data storage for up to 88 kinds of refrigerants. Automatic calculations of supercool and superheat. The refrigerant filling status observed through a sight window. 1/4" SAE Threaded Connectors.

【Extremely Sensitive Sensors】gives you the wide measuring range & high precision. Pressure range:-14.5~800psi. Temperature:-40~320℉. Pressure accuracy:±0.5%FS. Temperature:±0.9℉. Pressure resolution:0.5psi. Temperature:0.2℉. Available Units of pressure and temperature : [psi, kg/cm², kPa, Mpa, bar], [℉/℃].

【Automatically Cut Off Prevent Overcharging】SRC-500 allows the user to program desired quantities, ASAP hitting the value, it will automatically close the process with beeps. With a Solenoid Valve, good for customer confirmation on exact amount of refrigerant filling and recycling. High capacity up to 220lbs/100kg with an accuracy of ≤±0.05% of reading (Overload Detection: Display FULL and Alarm to Protect Sensors). Resolution: 0.011lbs.

【Certificated by CE Issued in Italy】Auto zero(Tare function) to read the amount of weight lost as you put in the refrigerant. Showing battery life. The repeat function allows for charging a previously stored amount. Auto-shutdown (if weight unchanged after 10 min). Unit converter (LB/ OZ/ KG). Self-test <2s after power-on.

【Pass SAE-2791/ SAE-2913 standards, A2L compatible Refrigerant Leak Detector】Japanese Semiconductor Sensitivity 20x Higher Than Soap Bubbles. High/ Medium/ Low of sensitivity to reach the best detection. Instantly responding to all halogenated gases (including chlorine, fluorine, bromine): [CFCs: R12, R11, R500, R503 etc.] [HCFCs: R22, R123, R124, R502 etc.] [HFCs: R134a, R404a, R125, R438a etc.] [HFOs: R1234 etc.] [HCs(Hydrocarbon): R290, R600a etc.] [ Blends: AZ-50, HP62, MP39, R410a etc.] 

【Switchable Manual/ Automatic Reset】manual reset for professional HVAC technicians, allowing your one hit to Zero Point Calibration to make your leak detection more efficiently. Automatic reset costs 10 seconds.

【Pass SAE-2791/ SAE-2913 standards, A2L compatible Refrigerant Leak Detector】Sensitivity Down to 0.1oz./year (3g/year). Instantly responding to all halogenated gases (including chlorine, fluorine, bromine): R290, R600a etc.][CFCs: R12, R11, R500 etc.] [HCFCs: R22, R123, R124 etc.] [HFCs: R32, R134a, R404a, R125 etc.] [HFOs: R454B, R1234YF etc.] [ Blends: AZ-50, HP62, R410a etc.]

【Infrared Absorption Spectroscopy, Anti-Interference Specifically for Automotive/ AC Maintenance】10-Year Sensor Life, 8-Hours continuous working after a charge, Efficiently putting an end to false trigger against cooling liquid, carb cleaner, transmission oil, engine oil, motor vehicle brake fluid etc. with a Large LCD Screen, new color graphic display, seen in bright sunlight or low light. Easily find leak dye with “Clip-On” UV LED at a glance.

【High Accuracy and Resolution for Charging Recovery】High capacity up to 220lbs/100kg with an accuracy of ≤±0.05% of reading (Overload Detection: display FULL and Alarm to Protect Sensors). Resolution: 0.011lbs. For use with all refrigerant types and refrigerant recovery cylinder tanks.

【More Than 26 Years of HVAC Experience 】Auto zero(Tare function) to read the amount of weight lost as you put in the refrigerant. Showing battery life. Auto-shutdown (if weight unchanged after 10 min). Unit converter (LB/ OZ/ KG). Self-test <2s after power-on.

CLD-100: 1【Certificated by SAE-J1627 and EN14624 Standards】Stop false alarms from soap bubbles solution. CLD-100, an advanced version of WJL-6000. Continuous detection mode, instantly responding to all halogenated gases (including chlorine, fluorine, bromine): [CFCs: R12, R11, R500, R503 etc.] [HCFCs: R22, R123, R124, R502 etc.] [HFCs: R134a, R404a, R125, R438a etc.] [HFOs: R1234 etc.] [Hydrocarbon: R290, R600a etc.] [ Blends: AZ-50, HP62, MP39, R410a etc.]

2【6 Modes of Sensitivity to Reach the Best Detection】20cm flexible sensing tip with max.sensitivity of 0.21oz/yr(6gr/yr). You can manipulate the probe into the way you want to go. It's powered by 4 AAA batteries with low Battery Warning.