Industrial & Scientific From WFPOWER on Amazon

③ A lifting suction cup is a useful tool for lifting glass surfaces, tiles, and other delicate materials. By creating a vacuum between the cup and the surface, lifting suction cups allow you to lift from the center of a glass panel, and they can be used in pairs for extra control and weight distribution

④ With a 5-inch suction cup, this lifter is best suited for dent pulling and lifting tile, glass etc.

Warm Reminder: 1.Use the suction cup dent puller from the shallow concave line start a little operation, cannot directly operate in the middle, patient little by little operation, will not leave a trace. 2.Use boiling water, heat gun or hair dryer heat up the dent surface to make sure there is good suction condition before lifting. 3.This dent repair puller will not be used if the car is covered in paint, torn paint, badly cracked or scratched.

Application: Suitable for the use of internal wiring harness of automobiles and can reduce the noise. Such as the wire harness of the dashboard

Size: Length 15 m,Width 19 mm

Easy to use：Car harness cloth tape is very convenient to use, just wrap the tape around the wire and gently tear it apart. No scissors or other tools are needed.

★ Powerful Magnet - Our superior strong base magnets are made of powerful Neodymium Magnetic Discs, therefore providing 110 lbs pull strength.

★ Anti-scratch Protective Cover - Soft rubber covers help prevent scratching surface.

★ Wide Application - Our base magnets are suitable for Warning Signs, Wire Loop Flags, Oversized Load Flags, Safety Flags, Warning Products, etc.

【Enhanced Safety】Crafted with meticulous attention, our 20AWG tinned copper wire features high temperature and oxidation resistance. With a maximum operating temperature range (-40°C to 200°C), it provides exceptional moisture resistance and insulation. Prevents short circuits and electrical hazards in wet and humid conditions.

【Easy to Use】Tinned copper wire simplifies stranded wire soldering, while the convenient silicone jacket allows easy peeling and cutting to desired length. Enjoy excellent flexibility for twisting and stretching.

【Wide Application】Ideal for various DIY DC electrical hookups, such as boat light installation, car modification, garage DIY, and electronic appliances. Perfect for single color LED strip lights, 12V/24V DC low voltage wire, light bulbs, and automotive wire. Max Loading Power 50W.

★ Easy Use : Simple, tool-free installation and avoid soldering. Cut the strip light along the cutting line, splice the ribbon electrically with this jumper；NOTE: When connecting waterproof LED strip lights with these LED strip connectors, silicon gel on the surface of soldering area must be peeled off； Easy to arrange your strips in the way you want or connect it to a power or dimmer.

★ Wide Application : 10mm 4 Pin 10 wire connector LED light strip connector cable kit for waterproof and non-waterproof 5050 3528 RGB SMD color Changing LED strip lights, while the PCB clip end only suitable for non-waterproof strip light ；These LED tape connectors support 0-4A current and 0-24V voltage input, heat resistance level from -20 ~ 100 degree.

★ Package Includes : 10 x 4 pin female connector cord, 10 x 4 pin male connectors LED 5050 RGB strip light connector cables(6.3in length in total).

★ Amazing Design : Aluminum alloy shell, electric polishing, gold stoving varnish treatment, fashionable, wear-resistant, non-slip, thick natural rubber, strong suction, strong ABS material pressing buckle, strong and durable, not easily deformed. With two 4-3/4 inch in diameter high quality suction pads with thickness 6mm.

★ More Stability : The suction handle comes with quick release and locking lever. The handle makes it convenient to lock the suction in place and provides stability when using it to maneuver objects from place to place, makes the job easier.

★ Multiple Applications : Great for lifting glass, adjust repair laminate floor gaps, handling glasses, moving sheet metal and plane surface materials.

Enhanced Safety Features: Your safety is our top priority. Our 2 leads wiring harness kit incorporates a power relay, blade fuse, and advanced safety mechanisms. These components protect against overheating, overloading, short circuits, and electrical faults, ensuring a secure and worry-free lighting experience.

Versatile Compatibility: Our wiring kit is universally compatible with a wide range of work light bars, including LED work lights and fog lights. With its 12V power supply and flexible 2 leads suitable for connecting 2 led lighting fixtures less than 130W.

Convenient Control: Take full control of your light bar with the included on/off switch. With a simple flick of the switch, you can effortlessly activate or deactivate your lights, offering convenient operation and power-saving functionality when not in use.

★ Installation - Easy installation with double faced adhesive tape on back,no need drilling,or any other Installation tool.

★ Out of the ordinary - Upgrade your jeep appearance, help it to look more fashionable. High precision original car data model design. Perfect for your car and make your car out of ordinary.

★ Package includes - 8 pieces of black door hinge covers.