Industrial & Scientific From WayinTop on Amazon

【Rotary Encoder】These are continuous rotary encoder switch; Type: Encoder code with Switch; Adjustment method: 360 Degree Rotary; Number of digits: 20 digits; Pins: 5.

【Encoder Specification】Shaft Diameter: 6mm/0.24inch; Shaft Length: 20mm/0.79inch; With built in push button switch (push to operate).

【Heatsink Size】20 x 15 x 10mm/ 0.79" x 0.59" x 0.39" with a M3 screw holes.

【High Quality】Made of silver anodized environmental aluminum profiles, good thermal conductivity, reduce the risk of hardware failure due to overheating.

【High Quality】The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency.

【Multi Size】This Set contains 10 different size drill bits diameter: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1 mm, 1.1mm, 1.2mm, each size have 5 pcs.

【Motor Speed Controller】Ultra-low voltage dc motor governor with the chip model: NE555; Potentiometer with switch function; Use a 2A resettable fuse to protect the controller; Power-on indicator.

【High Performance】Input supply voltage DC 1.8V-15V. Maximum continuous output current 2A. Maximum output power 30W. Duty cycle adjustable 0%-100%.

【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects.

【Current Sensor Module】Chip: ACS712ELC-30A; Pin 5V power supply, on-board power indicator; The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A.

【General Parameters】Model: KY-040, Working Voltage: 5V, One round number of pulse: 20.

【No Limited Rotation Counts】The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.

【Perfect Combination】This kit combine super bright colors LED Diodes with high quality assorted 1/4 watt-metal film resistors with values from 10 Ohm to 1 M Ohm 1% tolerance, with which you can quickly conduct circuit testing without welding.

【200PCS LEDs】Contains 200 LEDs of 5 common colors (Red, Green, Yellow, Blue and White), 40pcs each color; Head type: water drop shape round and clear heads; Max. Current: 20 mA

【Fantastic Gift】A must buy if you are looking for a special gift for your loved one's who likes exploring, camping, hiking, fishing, hunting, or backpacking. This compact multi-tool will fulfill all his demands for the expected and unexpected.

【Upgraded Multi-Tool】This 15-in-1 Compact Toolkit can be turned into Hammer, Axe, Pliers, PH1/PH2 Philips/SL4.5 Slotted/Flathead/Screwdriver, Saw, Wire Cutter, File, Bottle Opener, Pipe Pliers, Needle-nose Pliers, Magnesium Rod & Whistle, which is a perfect pocket tool that can meet all needs of your beloved.

【Easy to use】The measured values of the sensor can be interrogated by the I2C interface. The accelerometer can be operated at both 3.3V and 5V. Suitable for Arduino and Raspberry Pi.

【Motion Processing】DMP (Digital Motion Processing) motor reduces the burden of complex fusion calculation data, sensor synchronization, attitude sensors, etc.

【13-Channels Dual-Pass Power Supply】The PCB power distribution board can distribute 1-channel dual-pass power supply into 13-channels dual-pass power supplies, which is convenient for the power supply of multiple electrical appliances.

【Three Connection Methods】The design of the power distributor can make it have three ways of use. First: directly divide the positive and negative poles of 1 channel power supply into 13 channels. Second: You can connect several PCB power distribution board to expand more power interfaces. Third: You can short-circuit any interface at both ends of the power distribution board to achieve the effect of a multi-point interface of single-pass circuit.