UMLIFE Buying Guide & Brand Review (Nov. 2024 Updated)

UMLIFE 2PCS Temperature Controller Module with Case, XH W1209 LED Display Digital Thermostat Module with Waterproof NTC Probe -50~110℃ Electronic Temperature Temp Control Module Switch

Features

✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.

✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.

Show More

Digital LED Temperature Controller Module, XH-W3001 Thermostat Switch with Waterproof Probe, Programmable Heating Cooling Thermostat (12V 10A 120W)

Features

✹✹ LED Indicator Light: Display the current output status; Digital Display Tube: Shows measuring temperature, high accuracy of temperature measuring and controlling.

✹✹ Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature). Range from -50℃ to 110℃. High temperature control precision of 0.1℃.

Show More

2 PCS Solder Sucker Pump + 3 PCS Solder Wick Wire(2.5mm Width, 1.5m Length), Desoldering Wick & Desoldering Pump Solder Remover Tool Kit

2 PCS USB Voltage/Amps Power Meter Tester Multimeter, Test speed of chargers, cables, capacity of power banks

Features

Accuracy: plus or minus 1%, accurate measurement data. Input Voltage: 3V-15V, Voltage Resolution: 0.01V, Test Current: 0.05A-3.50A, Current Resolution: 0.01A, Capacity Range: 0-19999mAH

Displays Current (Amps), voltage and capacity (19,999 mah)

Show More

UMLIFE 10 pcs DC Motor PWM Speed Controller 3V 6V 12V 24V 35V Speed Control Switch Mini LED Dimmer 5A 90W

Features

✹✹Voltage range: DC 5~35V, Current range: Within 5A, Adjustable Speed range: 0~100%, PWM frequency: 20khz.

✹✹With reverse polarity protection, high current protection Operating.

Show More

10pcs 5V Mini Relay Shield 5V Relay Module 1 Channel 5V Relay Shield for WeMos D1 Mini also Compatible with Arduino

Features

☀☀Mini Relay Shield 5V Relay Module

☀☀NO: 5A(250VAC/30VDC), 10A(125VAC), MAX:1250VA/150W

Show More

UMLIFE 5pcs 650nm 5mw Laser Head Laser Tube Adjustable Focus 3~5V Red Laser Tube for Sight Positioning Sighting Telescope (Horizontal Line)

Features

Output Power: 5mw

Wavelength: 650nm

Show More

2pcs USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM

Features

✹✹The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.

✹✹Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;

Show More

UMLIFE 3PCS 6DOF 6-Axes Sensor Module Gravity Sensor GY-BMI160 Module Accelerometer Gyroscope Acceleration Gravity Sensor IIC I2C 3-5V for Arduino

Features

✹✹Module model: GY-BMI160; Power supply: 3-5V; Communication: standard IIC communication protocol; Chip: BMI160

✹✹This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package.

Show More

UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi

Features

❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor

❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection.

Show More

5pcs I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Module Replace INA219 with Pins

Features

The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface. The INA3221 monitors both shunt voltage drops and bus supply voltages, in addition to having programmable conversion times and averaging modes for these signals. The INA3221 offers both critical and warning alerts to detect multiple programmable out-of-range conditions for each channel.

The INA3221 senses current on buses that can vary from 0 V to 26 V. The device is powered from a single 2.7-V to 5.5-V supply, and draws 350 µA (typ) of supply current. The INA3221 is specified over the operating temperature range of –40°C to +125°C. The I2C- and SMBUS-compatible interface features four programmable addresses.

3pcs BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit

Features

Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.

5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.

Show More

UMLIFE 6PCS TM1637 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Digital Tube Board for Arduino Raspberry Pi

Features

Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin.

The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.

Show More