Tools & Home Improvement From TIDEWAY on Amazon

Precise, smooth, no burr edges - Tungsten steel tipped cutters are sharp enough, to slice smoothly into stock producing clean, splinter free.

Nice and Portable Package - The bit is putted in a firm plastic box that can protect it from damage in shipment. It's also easy storage and keep well condition for the next use.

✔ Carbide Tipped Flush Trim: 5/16’’ cutting diameter x 1-1/6 inch cutting height x 1/4’’ Shank

✔ Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.

✔ Carbide Tipped Straight Plunge High Production: 1/4’’ cutting diameter x 7/9 inch Cutting Height x 1/4’’ Shank

✔ Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Open-flute design promotes rapid chip clearance, necessary for high feed rates.

**Smooth Cutting Experience** - Slice smoothly into stock producing clean, splinter free, precise, smooth, no burr edges.

**15° Angle Blade Design** - Operation becomes more stable and has higher chip removal efficiency.

✔ Carbide Tipped Core Box: 3/32’’ radius x 3/16’’ cutting diameter x 2/7’’ cutting height x 1/4 inch Shank

✔ Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide, it can cut coves.Can be used with handheld, table-mounted and CNC routers.

Corner Rounding Edge-forming Router Bit : 3/32"Cutting diameter, Bearing Dia. 1/4 Shank

Unlike a regular square-edge bearing, it follows the radiused surface produced on the first pass. Will neither leave a flat spot nor gouge the edge.

【Hole saw kit includes】: Hole saw mandrel set Packing: 1 A2 heavy duty mandrel with 11mm shank diameter, 1 A4 small mandrel with 9mm shank diameter, 2 4341 high-quality drill bits, 1 6 angle wrench, compatible with 14-360 mm hole saw. 2 Kinds of Knife Holders: Allows you to change the applicable knife holder whenever you want, and it works smoothly every time without worrying about rust or corrosion slowing down or jamming the operation.

【Material】Heavy-duty A2 mandrel is made of high-quality alloy steel material, very high-grade pilot drill bit to ensure heavy load and ultra-fast drilling speed, fully ground, split tip, sharp and durable

✔ Carbide Tipped V-Groove: 90 degree x 2’’ cutting diameter x 1-1/6’’ cutting height x 1/2 inch Shank

✔ Cut decorative V-Grooves and lettering on signs with these V-Groove bits. Use with an edge guide to chamfer and bevel edges. Can be used with handheld, table-mounted and CNC routers.

✔ Our forstner drill bits that have extremely smooth sides, a flat bottom, and no surface tear-out. Exterior cutting rim, along with the inner brad point, keeps the bit in position on the workpiece. As the rim cuts the outside "circle," the bit's two bottom edges quickly cut out the inner wood

✔ Professional grade and Precision machine grounded. Cuts accurate angles with smooth surfaces and drills flat bottom holes and cuts through any type of grain including knots.

**Precise, smooth, no burr edges** - Tungsten steel tipped cutters are sharp enough, to slice smoothly into stock producing clean, splinter free.

**Light golden coating** - Adopted brand-new painting technology, beautiful, anti-rust and anti-corrosion.