Tools & Home Improvement From SUNAROUD on Amazon

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Position: Left,Right,Front

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Position: Front,Rear,Left,Right

✔The estimated yearly electricity use of this 115V freezer is only 193 kWh, while it's about 0.53kWh/24h. This means that the energy cost of keeping it turned on all year round is very low, and there is almost no need for special consideration for this. More importantly, it works silently and will not disturb you while it keeps on continuously.

✔This 3.5 cubic feet chest freezer has a considerable storage capacity of about 100 liters. It can store more than 100 pounds of meat theoretically, enough to meet your basic needs. If you want, the removable basket can hold something that you need to instantly pick up, such as your favorite ice cream.

✔Fully Cooling - Meet all your needs in summer in a small and compact refrigerator. This free-standing fridge has both refrigeration and freezing functions. The temperature of the freezer compartment can be controlled between -2°F and 18°F, while the temperature of the refrigerated compartment can be maintained between 26.6°F and 42.8°F.

✔5 Level Thermostat - This mini fridge with a capacity of 3.2 cu.ft offers 5 temperature options. Meet your needs in different scenarios, including but not limited to Kitchen, Living Room, Bedroom, Dorm, Apartment, Bar, Office, RV, and so on. We are equipped with a crisper drawer store at the bottom, allowing your fruits and vegetables to be stored in a comfortable environment.

SURFACE TREATMENTS: - -layers of Nickel (Light Nickel + High Sulfur Nickel + Full Light Nickel + Microporous Nickel ), Excellent Rust Resistance.; - One Layer of Opaque Chrome, Much Strong And Durable.; - One Layer of Clear Electrophoretic Coating，Excellent Scratch Resistance.; - The CASS Resistance Time is 72 Hours.; - The NSS Resistance Time is 120h without and 240h without Red .

SPECIFICS: 1. Quantity: Set of 23pcs + 2 Soket Keys; 2. Type: 6 Spline, Bulge Acorn, Closed End; 3. Type: Cone; 4. Thread Pitch: 1/2"-20 or 1/2x20 Threads; 5. Nut Height: 1.38 inch or 35mm; 6. Hex Size: 3/4" or 19mm; 7. Material: SCM 435 Steel (Heat Treated); 8. Finish: Glossy Black Finish

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Please remember to wear protective gear when handling and/or installing any auto part

FEATURES: - These Lug Nuts are manufactured with the highest quality to meet or exceed OEM Standards.; - Adopt One-Step Cold Extrusion Molding Technology with One-piece Carbon Steel.; - Made from SCM 435 Through-Hardened steel with a red plating.; - Heat treated coating prevents oxidation and protects the steel.; - 60 degree CONICAL bulge lug nuts for secure fit.; - Perfect for replacing rusted and/or broken lug nuts.

SURFACE TREATMENTS: - -layers of Nickel (Light Nickel + High Sulfur Nickel + Full Light Nickel + Microporous Nickel ), Excellent Rust Resistance.; - One Layer of Opaque Chrome, Much Strong And Durable.; - One Layer of Clear Electrophoretic Coating，Excellent Scratch Resistance.; - The CASS Resistance Time is 72 Hours.; - The NSS Resistance Time is 120h without and 240h without Red .

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Condition: 100% new in factory original package. Never be installed or used.

Reference part number:JLM 92355

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Part#: MN1774

Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!; Reprouction door hinge rebuild set includes all correct hardware needed to repair the door hinges on both RH and LH doors.This complete set will allow all 4 of the original door hinges on your 71-74 B-Body to be rebuilt offering a cost effective way of insuring the hinges are operating properly.Comes complete with springs, bushings, pins and necessary hardware.

Part#: MB1846

Part Number:CY39H9

Quantity:2 Piece Set

Position:Right Upper

Sliding Door Roller Bracket

Goodmark -- DRIVER OR PASSENGER SIDE LOWER DOOR HINGE

Part Number:MP79S7

Position: Rear Cargo Door

Notes: Door Hinge Pin and Bushing Kit -- Package Quantity:1; 12 Month Warranty

1.Quantity:Set of 20pcs

2.Type:Bulge Acorn, Closed End

FEATURES: - These Lug Nuts are manufactured with the highest quality to meet or exceed OEM Standards.; - Adopt One-Step Cold Extrusion Molding Technology with High Quality One-piece Carbon Steel.; - Made from SCM 435 Through-Hardened steel with a black plating.; - Heat treated coating prevents oxidation and protects the steel.; - 60 degree CONICAL bulge lug nuts for secure fit.; - Perfect for replacing rusted and/or broken lug nuts.

SURFACE TREATMENTS: - -layers of Nickel (Light Nickel + High Sulfur Nickel + Full Light Nickel + Microporous Nickel ), Excellent Rust Resistance.; - One Layer of Opaque Chrome, Much Strong And Durable.; - One Layer of Clear Electrophoretic Coating，Excellent Scratch Resistance.; - The CASS Resistance Time is 72 Hours.; - The NSS Resistance Time is 120h without Corrosion and 240h without Red Corrosion.

FEATURES: These Lug Nuts are manufactured with the highest quality to meet or exceed OEM Standards.

Adopt One-Step Cold Extrusion Molding Technology with High Quality One-piece Carbon Steel.

FEATURES: - These Lug Nuts are manufactured with the highest quality to meet or exceed OEM Standards.; - Adopt One-Step Cold Extrusion Molding Technology with High Quality One-piece Carbon Steel.; - Made from SCM 435 Through-Hardened steel with a chrome plating.; - Heat treated coating prevents oxidation and protects the steel.; - 60 degree CONICAL bulge lug nuts for secure fit.; - Perfect for replacing rusted and/or broken lug nuts.

SURFACE TREATMENTS: - -layers of Nickel (Light Nickel + High Sulfur Nickel + Full Light Nickel + Microporous Nickel ), Excellent Rust Resistance.; - One Layer of Opaque Chrome, Much Strong And Durable.; - One Layer of Clear Electrophoretic Coating，Excellent Scratch Resistance.; - The CASS Resistance Time is 72 Hours.; - The NSS Resistance Time is 120h without Corrosion and 240h without Red Corrosion.

FEATURES: These Lug Nuts are manufactured with the highest quality to meet or exceed OEM Standards.; Adopt One-Step Cold Extrusion Molding Technology with High Quality One-piece Carbon Steel.; Made from SCM 435 Through-Hardened steel with a black plating.; Heat treated coating prevents oxidation and protects the steel.; Perfect for replacing rusted and/or broken lug nuts.; Great for showing off your wheels and enhancing the overall look of your vehicle.

SURFACE TREATMENTS: -layers of Nickel (Light Nickel + High Sulfur Nickel + Full Light Nickel + Microporous Nickel ), Excellent Rust Resistance.; One Layer of Opaque Chrome, Much Strong And Durable.; One Layer of Clear Electrophoretic Coating,Excellent Scratch Resistance.; The CASS Resistance Time is 72 Hours.; The NSS Resistance Time is 120h without Corrosion and 240h without Red Corrosion.