Clothing, Shoes & Jewelry From Seashell Crafter on Amazon

BENEFITS: With the Layered Necklace Detangler Clasp, you can create fun and trendy combinations with your chokers, medium length chains, and long necklaces. Once your chains are attached, you will only need to use the sliding barrel clasp to take them on and off, which will save you time getting ready. The clasp creates a tiered effect for your necklaces in front and prevents them from rolling together on the back of your neck and getting tangled.

HOW TO ATTACH YOUR CHAINS: Attach one of the round spring clasps on the Layered Necklace Detangler Clasp to the end of your shorter necklace chain. Using the spring or lobster clasp on your chain, attach it to the Layered Necklace Detangler Clasp loop on the corresponding side. Then do the same for the longer length necklace using the remaining layered necklace spring clasp and loop. Now you can use the sliding barrel clasp to take both necklaces on and off at the same time.

ASSEMBLED IN THE USA: We are an American company that assembles each Layered Necklace Clasp Detanger in our Florida Studio. We test each and every component of the Layered Necklace Detangler Clasp, including the spring rings and sliding barrel clasp, to make sure it is working properly with no defects.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 inch to 2 inches.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

NAUTICAL EARRINGS SET: 1 pair of each - Anchor earrings, Ship's wheel earrings, Lighthouse earrings, Rope Anchor earrings, Sailboat earrings, and Crab earrings.

MIX & MATCH EARRINGS: Wear 1 Pair of Nautical Dangle Charm Earrings at a time, OR Wear 2 or 3 on 1 ear if you have multiple piercings, OR Wear 1 Nautical earring in 1 ear and a different one in the other, such as a Anchor earring in one ear and a Ship's Wheel earring in the other.

QUALITY: Each pair of dangle earrings has Tarnish-Free Stainless Steel Ear Wires for long-lasting wear. The charms are an antique silver color and made of zinc alloy which is tarnish resistant. If over time the charms get dull, they can easily be restored by polishing them with toothpaste.

Word Charm is Stainless Steel. The Robe & Crest Charms are Enamel and gold plated. Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 inch to 1 inches.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

BENEFITS: With the Layered Necklace Detangler Clasp, you can create fun and trendy combinations with your chokers, medium length chains, and long necklaces. Once your chains are attached, you will only need to use the sliding barrel clasp to take them on and off, which will save you time getting ready. The clasp creates a tiered effect for your necklaces in front and prevents them from rolling together on the back of your neck and getting tangled.

HOW TO ATTACH YOUR CHAINS: Attach one of the round spring clasps on the Layered Necklace Detangler Clasp to the end of your shorter necklace chain. Using the spring or lobster clasp on your chain, attach it to the Layered Necklace Detangler Clasp loop on the corresponding side. Then do the same for the middle and longest length necklace using the remaining layered necklace spring clasps and loops. Now you can use the sliding barrel clasp to take the necklaces on and off at the same time.

ASSEMBLED IN THE USA: We are an American company that assembles each Layered Necklace Clasp Detanger in our Florida Studio. We test each and every component of the Layered Necklace Detangler Clasp, including the spring rings and sliding barrel clasp, to make sure it is working properly with no defects.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 inch to 2 inches.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

SEA LIFE ANIMAL EARRINGS SET: 1 pair of each - Starfish earrings, Sea Turtle earrings, Dolphin earrings, Mermaid earrings, Seahorse earrings, and Octopus earrings.

MIX & MATCH EARRINGS: Wear 1 Pair of Sea Life Dangle Charm Earrings at a time, OR Wear 2 or 3 on 1 ear if you have multiple piercings, OR Wear 1 sea life animal earring in 1 ear and a different one in the other, such as a Starfish earring in one ear and a Sea Turtle earring in the other.

QUALITY: Each pair of dangle earrings has Tarnish-Free Stainless Steel Ear Wires for long-lasting wear. The charms are an antique silver color and made of zinc alloy which is tarnish resistant. If over time the charms get dull, they can easily be restored by polishing them with toothpaste.

Word Charm is Stainless Steel. The Robe & Crest Charms are Enamel and gold plated. Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 to 1 inch.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

Keeps layered necklaces from getting tangled while wearing

Barrel Clasp is secured with magnet clasp. Assembled in our studio in Florida by Seashell Crafter Artists.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 inch to 2 inches.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 inch to 1 1/2 inches.

The Charms are perfect for making DIY Jewelry such as Earrings, Necklaces, Bracelets, Anklets, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 to 1 inch.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 to 1 inch.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 to 1 inch.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

BENEFITS: With the Layered Necklace Detangler Clasp, you can create fun and trendy combinations with your chokers, medium length chains, and long necklaces. Once your chains are attached, you will only need to use the sliding barrel clasp to take them on and off, which will save you time getting ready. The clasp creates a tiered effect for your necklaces in front and prevents them from rolling together on the back of your neck and getting tangled.

HOW TO ATTACH YOUR CHAINS: Attach one of the round spring clasps on the Layered Necklace Detangler Clasp to the end of your shorter necklace chain. Using the spring or lobster clasp on your chain, attach it to the Layered Necklace Detangler Clasp loop on the corresponding side. Then do the same for the middle and longest length necklace using the remaining layered necklace spring clasps and loops. Now you can use the sliding barrel clasp to take both necklaces on and off at the same time.

ASSEMBLED IN THE USA: We are an American company that assembles each Layered Necklace Clasp Detanger in our Florida Studio. We test each and every component of the Layered Necklace Detangler Clasp, including the spring rings and sliding barrel clasp, to make sure it is working properly with no defects.

BENEFITS: With the Layered Necklace Detangler Clasp, you can create fun and trendy combinations with your chokers, medium length chains, and long necklaces. Once your chains are attached, you will only need to use the sliding barrel clasp to take them on and off, which will save you time getting ready. The clasp creates a tiered effect for your necklaces in front and prevents them from rolling together on the back of your neck and getting tangled.

HOW TO ATTACH YOUR CHAINS: Attach one of the round spring clasps on the Layered Necklace Detangler Clasp to the end of your shorter necklace chain. Using the spring or lobster clasp on your chain, attach it to the Layered Necklace Detangler Clasp loop on the corresponding side. Then do the same for the middle and longest length necklace using the remaining layered necklace spring clasps and loops. Now you can use the sliding barrel clasp to take both necklaces on and off at the same time.

ASSEMBLED IN THE USA: We are an American company that assembles each Layered Necklace Clasp Detanger in our Florida Studio. We test each and every component of the Layered Necklace Detangler Clasp, including the spring rings and sliding barrel clasp, to make sure it is working properly with no defects.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 inch to 2 inches.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

Charms are made of Zinc Alloy which is antique silver looking metal. They are tarnish resistant and Lead free. The size ranges from approximately 1/2 inch to 2 inches.

The Charms are perfect for making DIY Jewelry such as Bracelets, Necklaces, Earrings, Key Chains, Wine Charms, Bookmarks, etc.

Charms are available with or without 6mm Stainless Steel Jump Rings. Jump Rings make it easy to attach the charms to necklaces, bracelets, etc. The holes on the charms are on 1-2mm so most chains will not slide through them without taking off the clasps.

*Necklaces can be changed when you want to switch the look.

*Keeps the necklaces separated and prevents tangling when wearing them.

*The finished look is clean and professional.

PERFECT GIFT! There is a message to fit anyone's life circumstances or journey. These Inspirational Bracelets make the perfect gift for someone going through a tough time or could use a little encouragement. What a special way to let someone know you are thinking about them and you care!

EASY ADJUSTABLE FIT! No more annoying clasps to deal with! Simply choose the snap that best fits your size wrist and snap it together. The bracelet has 2 snaps so you can choose the smaller or larger size when you wear it. Smaller size is 6.75 inches long and Larger size is 7.75 inches long. The whole bracelet measures about 9 inches long.

QUALITY The leather is comfortable to wear and very durable. The word connector plate and snaps are made of non-tarnish stainless steel.