Tools & Home Improvement From RATTMMOTOR on Amazon

1) The basic configuration for the three axes of motion.CNC turret support.Automatic processing. Full support for ISO standard G command, HP plotter (HP PLT) format and carved processing (ENG) format.

2) Manual functions. Supports both via the machine input devices, such as handheld devices and other manipulation tools, also supported by the embedded computer input devices such as keyboard, mouse, complete manual operation.Incremental feed function.

Model Name: Mach3 USB Motion Card; 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.

This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !!!) .

This product has obtained the national patent, widely used in CNC lathe, general lathe, drilling machine, tapping machine, grinding machine, tool grinding machine, NC, CNC machine, punching machine, sawing machine, milling machine

Cooling the processing solution can save more than 80%, the cooling effect is no less than the conventional water-cooled.

Please first check whether the product size matches your own machine before ordering. This product is not suitable for CNC3018 engraving machine.

Nylon pressure plate: Light and convenient, good toughness, will not scratch any material, durable; T-screw: High standard and high precision, easy to use, thread is not easy to deform.

♞【Product】6.35x10mm-25x30mm flexible plum coupler,inner diameter 6.35mm(1/4") to 10mm (0.39") ,D25 to L30mm.Structure:Jaw / Spider

♞【Advantags】 With high rigidity,high flexibility,vibration absorption,high torque and low inertia,with zero back clearance,easy disassembly and assembly,same rotation clockwise and counterclockwise.

♞【Fit for】Nema23 stepper motor

♞【Material】This bracket is made of highquality aluminum alloy, it has good wear resistance and heat resistance, it is sturdy and for long service life

【55mm Brushless Spindle】★ The spindle power is 400W, the input voltage is 48V, the torque is 0.45 N.m, the maximum spindle speed can reach 12000R/min; the spindle radial runout is 0.01-0.03mm, high speed, high precision, the spindle is equipped with a 55mm fixture bracket, mainly suitable for small CNC engraving machine.

【High-precision integrated chuck】★ The spindle motor is equipped with an integrated tool holder and collet ER8, and the integrated output shaft has higher precision.

Diameter: 80mm, suitable for 80mm CNC spindle motor

The size of the dust outlet is fixed, for connecting a 100mm hose

【Description】The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.

【Parameter】This is a normally closed 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.

Suitable for 1.5KW/2.2KW/3KW/4KW/7.5KW Inverter VFD VSD

Notice: Only applicable to "Huanyang" Inverter, other inverters are not applicable !