Tools & Home Improvement From MYSWEETY on Amazon

GRBL 1.1f CNC Controller 3-Axis CNC Router Machine Control Board for CNC 3018 Pro 3018 Max 3018Pro-M Milling Machine

Ratings for MYSWEETY (CPR Score)

Features

♞ Model: Upgraded 3 Axis GRBL 1.1f USB Port GRBL Control Board. Input voltage: 24VDC

♞ Support Software: GRBL Contol, Candle(3 axis), UGS(Universal Gcode Sender). Support System: Windows XP/7/8/10, Linux

Show More

Single Phase to 3 Phase Converter, MYSWEETY AC 220V/2.2KW 3HP 10A VFD Inverter Frequency Converter for Spindle Motor Speed Control (1 Phase Input and 3 Phase Output)

Ratings for MYSWEETY (CPR Score)

Features

This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,10A, VFD Dimension: 130 x 103 x 200 mm (L x W x H). 🔺🔺Please note: The working environment is relatively humid, with water mist, water droplets or metal objects falling in, which will cause a short circuit.

Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase.

Show More

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

Ratings for MYSWEETY (CPR Score)

Features

🛠️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).

🛠️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.

Show More

CNC Router Machine, MYSWEETY CNC Wood Router

Ratings for MYSWEETY (CPR Score)

Features

💡【High Power Spindle & All-metal Body】: This 3020 PLUS CNC machine is solidly built with all-metal body structure and upgraded 500W 52mm spindle with E11 collet, more powerful and higher efficiency, making it possible to cut stainless steel, aluminum and other metals

💡【High Precision & Stability】: Without any plastic parts. The CNC router is equipped with solid dual steel linear guide rails which are 12mm thick and also come with bearing slides and and T8 screw lead. All-metal X-Z axis part, up to 73mm of vertical travel, more powerful stepper motor, all of these are designed to ensure the movement of the 3-axis faster and more stable, resulting in improved engraving accuracy

MYSWEETY Compound Slide Table, Multifunction Worktable Milling Working Table Milling Machine Compound Drilling Slide Table For Bench Drill

Ratings for MYSWEETY (CPR Score)

Features

The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.

The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy

Show More

CNC Touch Plate, Z-Axis Router Tool Setting Touch Probe Mach3 CNC Router CNC Engraving Machine Auto-Check Instrument Setting Probe

Ratings for MYSWEETY (CPR Score)

MYSWEETY 2 in 1 7000mW CNC 3018 Pro Engraver Machine, GRBL Control 3 Axis DIY CNC Router Kit with 7W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

Ratings for MYSWEETY (CPR Score)

Features

🛠️【2-IN-1 CNC 3018 Pro】- New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL; Working area: 30x18x4.5cm; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10. Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry.

🛠️【Come with 7W 7000mW module】- can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, ceramic/stone, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver.

Show More

MYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump

Ratings for MYSWEETY (CPR Score)

Features

✅ Package include: ①1 x 1.5KW 110V Spindle Motor ②1 x 1.5KW 110V VFD ③1 x 75W 110V Water Pump ④1 x 196 in Water Pipes ⑤1 x 2.6 in Spindle Motor Mount ⑥1x40 in Electric Wire ⑦10 x Drill Bits ⑧1 x2.8 in Brushes ⑨13 x ER11 Collet(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm)

✅1.5KW Spindle Motor：Technical Parameters:φ1.16 x 10.5in (Diameter: 2.95cm x Length: 26.7 cm); Power: 1.5KW; Voltage: 110V; Current: 8A; Collet Size: ER11; Bearings: 4 bearings. Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.001 mm; Weight: 7.05 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter.

Show More

MYSWEETY CNC Spindle Motor Kits, 2.2KW Water Cooled Spindle Motor 2.2KW Inverter + 80MM Clamp Mount +13PCS ER20 Collet + 5M Water Pipe + Water Pump for CNC Router

Ratings for MYSWEETY (CPR Score)

Features

✔️Package include: ①1 x 2.2KW 220V Spindle Motor ②1 x 2.2KW 220V VFD ③1 x 75W 220V Water Pump ④1 x 196 in Water Pipes ⑤1x40 in Electric Wire⑥ 10 x Drill Bits ⑦ 1 x 3.14 in Spindle Motor Mount(with 3pcs screws) ⑧13 x ER20 Collet(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm).

✔️2KW Spindle Motor：Technical Parameters:φ3 x 13 in (Diameter: 7.5 cm x Length: 33.6 cm); Power: 2.2 KW; Voltage: 220V; Current: 8.5A; Collet Size: ER20; Bearings: 4 bearings, increase spindle life. Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.001 mm; Weight: 11.46 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter.

Show More

CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water Cooled Spindle Motor + 2.2KW Single to 3 Phase VDF+110v Water Pump + 3.15 Inch Clamp + 196 Inch Water Pipe + 40 Inch Electric Wire+ 13pcs ER20 Collet

Ratings for MYSWEETY (CPR Score)

Features

✅【Spindle Technical Parameters】Spec: Φ2.39 x 11.37 in (Diameter: 7.2 cm x Length: 28.9 cm) Power: 2.2 KW; Voltage: 110V; Current: 8.5A; Collet Size: ER20; Bearings: 4 bearings,（2x7005C P4 DT, 2x7003C P4 DT, increase spindle life）Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.0015 mm; Weight: 11.46 ib. Mainly used for engraving machine or used with frequency converter.

✅ 【VFD Inverter】 Power: 2.2 KW; Input Voltage: 110 V; Output Voltage: 110 V; Input Phase: 1 phase or 3 phase; Output Phase: 3 phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect; DC cooling fan low noise, large air volume. Perfect match with the water cooled spindle motor!

Show More