Tools & Home Improvement From LUXRILIX on Amazon

[FIT PERFECTLY]: Our Replacement Holder Part with Exit Needle Compatible with Keu-rig Coffee Makers Models: K10, K15, K40, K45, K50, K55, K60, K65, K70, K75, K77, K79, B10, B40, B45, B50, B55, B60, B65, B70, B75, B77, B79 and CLASSIC models,➤Do 𝐍𝐎𝐓 compatible with the Keu-rig 𝟐.𝟎 coffee machine, Our k.cup holder has width at the top 2.32inch, height 3.35 inch, the bottom width 1.34inch➤➤if you buy the wrong holder needle may cause the holder does not lock in and stay loose

[PREMIUM QUALITY]: Exclusively Designed for budget-conscious coffee drinkers, these reusable k cups pod holder for Keu-rig coffee machines is made of high-quality 100% BPA-free plastic.Meet long-lasting durability while avoiding frequent cleaning of coffee brewers

Replacement model：62-23543-01,62-23543-02,62-23543-03,62-23543-04

Applicable circumstances：Detect when the burner flame ignites and send a signal to the control panel to stop the ignition. Length (mounting flange to sensor tip) 2-1/2", length-sensor offset: 1-9/16". Angle sensor offset: 90 degrees. Termination 1/4" male thread quick connect.

★PACKING LIST: 1 x 3387134 dryer cycling thermostat (limit 155-25 degree F), 1 x 3977767 Dryer high-limit thermostat (221 degree F), 1 x 3392519 Dryer thermal fuse (196 degree F), 1 x 3977393 Dryer thermal fuse (309 degree F)

★PRODUCT DESCRIPTION：3387134 Circulation thermostat coordinated with the temperature of the dryer and adjusted to maintain a certain temperature. 3392519 Dryer thermal fuse stops current flow to motor circuit in case of dryer overheating

Part Number: Flame Sensor 52W29, approx. 5.25" overall length.

Perfect replacement: Replacement flame sensor forAllied, Armstrong, Concord, Ducane, Magic Chef, and Magic-Pak furnaces. Fits 52W2901, 52W29, 31L71, LB-74940A, 31L7101. Compatible with G40, G41, G50, G51, G60, G61, G71 furnaces.

W10144820 WATER INLET VALVE REPLACE : Water Inlet Valve (Mfg #WPW10140911) perfectly replaces parts: W10140911, W10311458, WPW10144820VP, AP6015761, PS11749042, EAP11749042, 1480998, AP4371093, AH2347919, EA2347919, PS2347919, EA2347919

REPLACEMENT FOR WHIRLPOOL WASHER WATER INLET VALVE SPEC. : The wpw10144820 water inlet valve includes red hot water valve, blue cold water valve, vacuum break and thermistor sensor for sensing water temperature, w10144820 washer water inlet valve has the functions of balancing the temperature of cold and hot water, controlling the water level and draining water

Replacement model：62-23543-01,62-23543-02,62-23543-03,62-23543-04

Applicable circumstances：Detect when the burner flame ignites and send a signal to the control panel to stop the ignition. Length (mounting flange to sensor tip) 2-1/2", length-sensor offset: 1-9/16". Angle sensor offset: 90 degrees. Termination 1/4" male thread quick connect.

❄PERFECT FIT: The 1043 humidifier filter compatible for the Essick Air, AIRCAR.E Humidifier Models EP9500 /EP9700 /EP9800/ EP9R500 /EP9R700 /EP9R800/ 821000/ 821001/ 826000 /826800 /831000 /SS390DWHT and Bemis space saver 800 8000 water wick series air humidifier(more models in product description or query us)

❄UPGRADED QUALITY: Our 1043 humidifier filter use the high-quality and environmental-friendly filter paper,adopt the efficiently filtration technology to maximize the filtration of impurities, reduce pressure, prolong the using time

[PART Description]: SEN01114 Furnace Flame Sensor, Designed to detect the flame safely. When the sensor does not detect the flame gas valve is closed to prevent gas from flowing into the home.FYI: The most common problem that we see when a flames sensor is not working properly is: The furnace main gas burners ignite, the main gas burners stay on for only 8 to 10 seconds, then the burners shut right back off.

[PERFECT REPLACEMENT]: The SEN01114 American Standard Trane Furnace Flame Sensor replaces part numbers: B340888P01, PSE712, SEN0441, SEN441, SEN0337, SEN00491, SEN0337, SEN0491, SEN01114, CARSEN491 and CARSEN1114.

FAST HEATING, EXCELLENT HEAT RESISTANCE - Our 134792700 Dryer Heating Element compatible with Electrolux Dryer Heating Element, The nickel-chromium content of the dryer heating element reaches 97%, 30% higher than similar products.Excellent heat resistance and the length of the upgraded electric heating wire is longer than that of other ordinary dryer replacement parts. Replacement resistance increased by 25%. Long heat-resistant life. This saves maintenance staff costs. The right chiose for you.

COST-EFFECTIVE ：134792700 Dryer Heating Element kit，include 1*134792700 Dryer Heating Element 1*3204267 Cap Thermostat and 1*137032600 Thermal Fuse. It compatible with Frigidaire Electrolux Kenmore Dryer Heating Element,also ideal is replacement for crosely Dryer Heating Element

✅APPLICATIONS：Suitable for models starting with WCG97 (WCG97US0DS00,WCG97US6DS00)but not for WCG97US0DS, not suitable for models starting with WEG7 ►If your knob has “Off”, “Ignite” and other information on the side of the knob, please do not buy this product, the model you need is W10766544, ❗❗Our 5 pack of W10594481 Knob weighs up to 0.85LB, Far more than the weight of cheap plastic material, each one is made of METAL, and the top is frosted,enhances the comfort when using

✅PAY ATTENTION TO THE DIRECTION ：W10594481 stove knob replacement for Whirlpool Gas Cooktop Range knobs（5PK) with a 0.18in "D" axis,Our bottom connection is "D" shape,⚠️When the pointer at the top of our knob points to 12 o'clock, face your D-port direction to the RIGHT,please compare carefully with the ORIGINAL knobs of your whirlpool- stove