Electronics From LoveRPi on Amazon

2021 POE+ HAT FOR PI 4: Designed for the powerful Raspberry Pi 4, the Raspberry Pi PoE+ HAT delivers up to 20W of power from IEEE 802.3AT PoE+ compliant switches so that your Pi 4 never runs out of juice.

POWER USB 3.0 DEVICES: Two USB 3.0 Type A ports on the Raspberry Pi 4 can deliver up to 1A each. The original PoE HAT could not supply enough current for demanding USB 3.0 devices like backup drives, 4K webcams, and more.

PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories.

FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments.

FULL SIZE USB PORTS FOR RASPBERRY PI ZERO: Simple plug and play USB hub for MicroUSB OTG capable devices including HP, Lenovo, Dell, and Acer Computers and Tablets.

REQUIRES HIGH QUALITY 1A OR HIGHER POWER CAPABILITY: The host device must provide adequate power to the connected USB devices or the USB devices may not be recognized or disconnect during use. For Raspberry Pi Zero, we recommend using our LoveRPi 2.5A certified power supply with power switch for best results.

COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs.

GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model.

MicroUSB Female to Male Push Power Switch for Raspberry Pi 3 / 2 / B+ / A+ / 0 Designed by LoveRPi

One Push On/Off Power with Dramatically Reduces Wear and Tear on Sensitive MicroUSB Connectors

OPTIMIZED RASPBERRY PI 3 MODEL B+ POWER SUPPLY: Raspberry Pi 3 boards use a lot of current and we have optimized our power supplies to be USB spec compliant for safety while optimizing voltage stability and current delivery.

EXCLUSIVE POWER STATUS LED: Know when power is on via the inline power status LED built directly into our power supply cable. Never guess whether there is power or not going to your Raspberry Pi 3 Model B+.

EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications.

LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.

MicroHDMI to HDMI Cable for Raspberry Pi 4: LoveRPi's MicroHDMI to HDMI Male to Male cable enables Ultra HD 4K 60 Frame-per-Second on your Pi 4. Please note the difference between MicroHDMI use for the Pi 4 and MiniHDMI used for the Pi 0.

Standards Compliant HDMI 2.0 High Speed Spec: Our high quality cable features independent conductors for all 19 pins per the HDMI spec and fully supports HDMI 2.0, 2.0a, and 2.0b features.

CAMERA MODULE FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for low latency and high quality imaging required for computer vision, streaming media, and remote data acquisition.

INTEGRATED IR FILTER: Infrared light is invisible to the naked eye but will cause hue changes to CMOS camera sensors. The integrated filter prevents infrared light from distorting the image hue resulting in color accurate imagery for daytime outdoor applications.

ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC.

INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market.