Pet Supplies From K KAMOER on Amazon

Size: 72*39.5*3.4mm

It can be fixed on the wall of the glass cylinder at will and can be adjusted.

Two PC screws are added to fix the water pipe, which is convenient for adjusting the height of the water pipe.

X1 PRO T dosing pump as a single head titration pump, can supplement trace elements required by various organisms. As a calcium counter-peristaltic pump, it can provide a steady flow of water to the calcium reactor. By automating the addition, it greatly reduces the workload of manual addition and also avoids mistakes caused by manual addition such as missed addition, over- or under-addition.

Working mode: manual mode, continuous mode, automatic mode, with flow calibration function, support setting multiple groups of custom time periods. With power-off memory function. Support iOS & Android system operation interface.

X1 PRO T stepper mini peristaltic dosing pump adopts plastic gear pump, no slipping and rusting problem. Adopt high reliability threaded joint to avoid liquid leakage problem. Long life imported pump tube is equipped as standard.

In daily use, S2 is a sensor that detects the lowest water level. The function of S1 is to cause the float to rise when the water level exceeds the S2 optical sensor and reaches the S2 float sensor when S2 fails (for example, foam is generated in the sea tank, etc.) Alarm, stop refilling.

Please install the sensor correctly (the main picture has a picture description), otherwise the product will not work. And the distance between the two sensors is not less than 10cm. The height difference between the make-up bucket and the sump/master tank should not exceed 1.5 meters, and the liquid level of the make-up bucket should not be higher than the liquid level of the sump/master tank.

Some problems mentioned in product reviews: such as quality assurance, installation problems, and product failure to work, etc., please watch the demo video and detailed introduction on the details page. We give a detailed explanation on the details page.

In daily use, S2 is a sensor that detects the lowest water level. The function of S1 is to cause the float to rise when the water level exceeds the S2 optical sensor and reaches the S2 float sensor when S2 fails (for example, foam is generated in the sea tank, etc.) Alarm, stop refilling.

The float sensor detects whether the water replenishment tank is short of water, and once the water is short, it will stop and alarm.

Please install the sensor correctly (the main picture has a picture description), otherwise the product will not work. And the distance between the two sensors is not less than 10cm. The height difference between the make-up bucket and the sump/master tank should not exceed 1.5 meters, and the liquid level of the make-up bucket should not be higher than the liquid level of the sump/master tank.

Support WIFI mobile phone remote control, IOS and Android are common.The speed, flow rate and time can be adjusted and controlled by the knob.

POWER-OFF MEMORY（The customer can set whether the pump needs to save the status before power off after restart by going to the "Restart Record Screen"）:The parameters will not be lost after the peristaltic pump is powered off.

Applications: calcium back titration, aquaculture, assembly line filling, experimental research.

Through automatic adding, it can greatly reduce the workload of manual adding and avoid the mistakes caused by manual adding such as missing adding, over-adding or under-adding. When used as calcium inverse, it can provide stable flow of water for calcium reactor.

Product features:Use stepper motor to ensure stable operation for a long time; OLED display, with rotary encoder to achieve local control; remote control via App, support iOS and Android system; memory function, maintain the state before power failure after power failure recovery, set parameters are not lost when power is lost; use imported PharMed BPT pump tube; support remote upgrade firmware.

Software features: flow calibration function; adjustable running speed, maximum flow rate up to 110 ml/min; pump tube use time statistics and life alarm.

Caution: Please use the power adapter that comes with the product and work under the specified working environment. This product only supports 2.4G Wi-Fi, not 5G Wi-Fi. the device should be placed in a reasonable position, the connection tube of liquid inlet should be as short as possible, and the connection tube of liquid outlet should be overhanging above the cylinder. Please check carefully if the liquid inlet and outlet are connected in the right direction, never connect them backwards.

Note：If there is a situation that you cannot connect APP Wifi, please contact us, we promise to help you until you connect.

Related accessories can be found in the "Accessories" section of the store.

X2SR is a two-channel Wi-Fi water change dosing pump, which can be remotely controlled by mobile app, users can make regular and quantitative automatic water change to seawater tank or freshwater tank, and complete automatic water refill by submersible pump.

For the possible risk of overflow, X2SR is equipped with overflow sensor as standard, when the water level reaches the overflow sensor, it will trigger an alarm and stop the water refill and water change. X2SR is equipped with two step pumps to meet the long time continuous use.

Users can set up and control by downloading APP. The set parameters will not be lost after power failure. (If you can't connect, please contact us, we will help you until you connect).Note: This product only supports 2.4G Wi-Fi and does not support 5G Wi-Fi.

Caution: Please use the power adapter that comes with the product and work in the specified working environment. This product only supports 2.4G Wi-Fi, not 5G Wi-Fi.