Geekstory Buying Guide & Brand Review (Nov. 2024 Updated)

Geekstory for ATMEL 51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable + 10Pin to 6Pin Adapter Board for Ender 3 or Ender 3 Pro

VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory

Features

VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.

The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.

Show More

Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

Features

BN-880 is suitable for Open source flight controller, not for flight control with SCM

Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L

Show More

1460Pcs 1/4W 73 Values 1% Precision Metal Film Electronic Resistor Assortment Kit Set 1ohm-1Mohm Geekstory

Features

★【High Quality】：Resistance Tolerance: ±1%; Power: 1/4w. 1/4w metal film and thicker metal pins for better connection, low temperature coefficient and stable performance, which help you complete the electrical experiments faster and smoother

★【Applicable】：The resistor set can be applied to Arduino projects and other electronic and electrical experiments

Show More

BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory

Features

This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.

The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.

Show More

Geekstory Optical Fingerprint Reader Sensor Module Door Lock Access Control Red Light for Arduino Mega2560 UNO R3

Features

Optical fingerprint sensor secure your project with biometrics. This fingerprint module can be used for fingerprint collection, fingerprint registration, fingerprint comparison and fingerprint search, it's easy to use, so its perfect for any project

Fingerprint sensor module can work with any microcontroller which with serial port: such as compatible with arduino, 51, avr, stm32, pic, arm, msp430

Show More

32db High Gain Cirocomm 5cm Active GPS Antenna Ceramic Antenna 25x25x2mm Geekstory

Features

With Center Frequency 1575.42MHZ

IPEX Connector

Show More

Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS

Features

G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Raspberry pi, Linux and Google Earth, not for iOS Android system.

The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.

Show More

Geekstory Voltage Tester Sensor Measurement Detection Module DC 0-25V Terminal Sensor Module for Arduino UNO Mega Robot Smart Car Geekstory (Pack of 10)

Features

This voltage tester module is based on a resistive divider principle design, make the interface terminal input voltage reduced 5 times.

The voltage detection module detects a minimum input voltage of 0.00489V × 5 = 0.02445V

Show More

Geekstory CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module +SOIC8 SOP8 Test Clip for EEPROM 93CXX/25CXX /24CXX

Features

You will get CH341A Programmer Module + Test Clip.

The SOP8 clip enables in-circuit programming of EEPROM without disassembling the chip, making flashing the BIOS simpler and more efficient.

Show More

Geekstory DC 12V-24V PIR Sensor Infrared Motion Sensor LED Motion Detector Light Switch Controller with Adjustable Timer Function for Flexible LED Strip Lights

Features

★Power supply voltage:12-24V, Current: 6A. Note: please confirm the relevant parameters before using

★Adjustable Delay Time: The sensing distance of the PIR motion sensor is about 8m/26ft, and there is a time setting button at the back of the controller, which can be rotated to set the delay minutes of turning off the switch from 1 to 10 minutes

Show More

Geekstory 5PCS HC-SR312 AM312 Mini Pyroelectric Infrared PIR Human Sensor Module Modules Body Motion Automatic Detector DC 2.7 to 12V for Arduino Raspberry Pi

Features

★Low power consumption, small size, easy to install. Module Lens: Small lens. Working voltage: DC 2.7-12V;Static power consumption: <0.1mA;Sensing range: ≤100 degree cone angle, 3-5 m; (required depending on the lens) Working temperature: -20 to + 60 ℃

★It is a digital intelligent automatic control product based on passive human body infrared technology. It has high sensitivity and high reliability and is widely used in various automatic induction electrical equipment

Show More

Geekstory ESP32-S2 Saola -1 Dev Kit ESP32-S2 WROVER Development Board with 4 MB Flash and 2 MB PSRAM

Features

ESP32-C3-DevKitC-02 development board integrates complete Wi-Fi and BT LE functions. ESP32-C3-WROOM-02 is a general-purpose module with embedded flash of 4 MB. Single USB-UART bridge chip provides transfer rates up to 3 Mbps

All aAll available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing.vailable GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing.

Show More