Electronics From GeeekPi on Amazon

DeskPi Lite is a lightweight version of DeskPi Case for Raspberry Pi 4B; Driver Compatible with DeskPi Pro; Design with all ports on the back;It can be used as a set-top box.

Built-in Heat Sink with PWM fan;Fan supports official speed regulation and Programmable speed regulation.

Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM), For 4GB version, please refer to ASIN: B0B3M2HKN6; For 2GB version, please refer to ASIN: B0B7DFF7TY;

This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B.

Raspberry Pi 400 is a powerful, easy-to-use computer built into a neat and portable keyboard.Just simply connect to a mouse, and a monitor with the Pi 400, you will get a complete personal Computer.

Featuring a quad-core 64-bit processor, 4GB of RAM, dual-display output, and 4K video playback, as well as a 40-pin GPIO header.

This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included!

The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B; The resolution of 3.5 inch touch screen can be adjusted by software; The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker; It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely.

DeskPi Lite is a lightweight version of DeskPi Case for Raspberry Pi 4B;Driver Compatible with DeskPi Pro. For DeskPi Lite Case Kit, please refer to ASIN B09R6JR47S; For DeskPi Lite M.2 SATA Expansion Board, please refer ASIN B0C6SM8B2B

Design with all ports on the back;It can be used as a set-top box.

【Only USB1.0/USB 1.1/USB2.0 Full-Speed compatible】Please Note: USB 2.0 High Speed Devices are Not Supported

【Power Isolator Inside 】1W MAX. Low and full speed data rate: 1.5 Mbps and 12 Mbps

Raspberry Pi 4 4GB---Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1. 5GHz---4GB LPDDR4-2400 RAM;double-true Gigabit Ethernet

PiStation Case---Specifically designed for Raspberry Pi 4;Safe Shutdown and Safe Reset;Functional LED power indicator;Functional POWER and RESET buttons

【Expansion of 2.5-inch HDD/SDD Interface】DeskPi Pro Kit extends a 2.5 inch hard disk port through the USB3.0 port, supports SDD/HDD, and provides independent 12V 2A power supply. It provides a convenient and quick way to create your home media center and build NAS or Web server for your Raspberry Pi 4B Board with 2.5 inch SATA HDD/SSD.

【Micro HDMI ports to Full Size】No need of Micro HDMI cable to save an unnecessary cost.

Compatible with Raspberry Pi Zero 2 W / Pi Zero W/ Pi Zero. ( NOTE:Raspberry Pi Board is Not Included)

The heatsink is for better heat dissipation and GPIO header makes it easy to connect the GPIO ports.

Compatible with Raspberry Pi 4 Model B --- This 19" 3U rackmount with Micro HDMI to HDMI Boards are only for Raspberry Pi 4B board, supports 1-14 Units of Raspberry Pi 4 Model B.(Raspberry Pi Board NOT Included)

Rackmount Size is 3U standard, the dimension is 19"×5.11"(482×130mm), fully compatible with 19" server racks.

Access to all ports of Raspberry Pi Board, such as USB port, Ethernet port, power port, sd card slot and so on.

Enough room for heat dissipation of Raspberry Pi Board.

Standard:IEEE 802.3af-2003 PoE

Input voltage: 37~57V DC, Class 2 device;Output voltage: 5V DC/2.5A;

The 40pin header kit box is a full range of 40pin component boxes for electronic enthusiasts DIY.

Packing List: 2 * 2x20 Long Female Header (Pin Len: 12mm), 2 * 2x20 Long Female Header (Pin Len: 11mm), 2 * 2x20 in-line female row (Pin Len: 5.5mm), 2 * 2x20 straight Pin Header, 2 * 2x20 90 Degree Curved Pin Header, 2 * 2x20 90 Degree Curved Pin Header,1 * GPIO Edge Extension

Compatible with Raspberry Pi 4 Model B --- This Armor Lite Aluminum Heatsink is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version.

Support PWM Speed Control --- Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS.

Color LED fan with automatic color change;Customized Case,please refer to ASIN:B085HFTMB1

Single-stack tower-style heatsink

Only for Raspberry Pi Low-Profile CPU Cooler,Raspberry Pi Horizontal ICE Tower Cooler,please refer to ASIN:B07ZV1LLWK;Case with Fan,please refer to ASIN B086KTMZLX;Case with power supply,please refer to ASIN:B09R1M9YCZ

Very Easy to Set Up -Only for Raspberry Pi 4 Model B

Ice Tower Structure;Easy to setup; Raspberry Pi 4 Case with ICE Tower Fan: B07ZCX5KG6

5mm copper tube;Super heat dissipation

Low Cost & High Performance---Raspberry Pi Pico is a micro-controller board based on the Raspberry Pi RP2040 micro-controller chip. It has been designed to be a low-cost, high-performance micro-controller board with flexible digital interfaces.

CPU Features---Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory.

UPS Plus is a new generation of UPS power management module which supports OTA firmware upgrade and supports RTC onboard.

There are two INA219 chip onboard to detect batteries voltage and the voltage output from UPS Plus to Raspberry Pi.

Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.

Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.