Tools & Home Improvement From G green EXPERT on Amazon

【Powerful Sump Pump】High performance PSC motor with thermal overload protection produces great 1.5HP output power for increased reliability and longer motor life. Pump has the ability to lift water up to Max. 33 feet of vertical height; Removes water up to 5000 gallons per hour at zero feet, 68.5 gallons per minute at 10 ft of discharge lift.

【Adjustable Float Switch】Buckle design of float switch can keep the floater uplifted for permanently working until plug off, or clamp to pump body for stable ON/OFF operating automatically. Designed for quickly draining both clean/dirty water from flooded house, basement, sumps, window wells, water tanks, pools, cisterns, hot tub spas, and flooding in low lying areas.

【Stable and Reliable Performance】Efficient PSC motor with thermal overload protection produces powerful 1HP power for increased reliability and longer motor life. Pump will keep high flow 1050 US GPH at 20psi, holds water at max pressure 45psi.

【Automatic Operation and Easy to Install】Pressure switch is pre-set at 20/45 psi for automatic operation. Jet pump and pre-charged metal pressure tank are factory assembled in thermoplastic for stability and practicality and ready to install.

【Split Capacitor Motor with Efficiency】Oil-free PSC motor with thermal overload protection produces 1/3hp output power for higher performance and increased reliability. Pump moves up to 2000 gallons water per hour at zero feet, 22.5 gallons per minute at 10 ft of discharge lift.

【Last-inch Drain Pump】Unique water sensor switch with non-return valve drains water to the lowest suction level of 1/25inch without back flow. It would stop automatically after running 15sec when there's no water covering on the sensor to remove more remaining wate on flat floor. Designed for completely draining clean or slightly dirty water from flooded house, basement, sumps, window wells, water tanks, pools, cisterns, hot tub spas, and flooding in low lying areas.

【Powerful Drain Pump】Oil-free PSC motor with thermal overload protection produces 1/2hp output power for higher performance and increased reliability. Pump moves up to 3000 gallons water per hour at zero feet, 36 gallons per minute at 10 ft of discharge lift. Pump handles up to 1-1/3inch solid with ease.

【2 In 1! Automatic&Manual Operation】This utility sump pump can work manually or automactially according to actual needs. With easy mode switchable button, you can freely switch pumping operation from Manual to Automatic On/Off.

【Powerful Sump Pump】High performance PSC motor with thermal overload protection produces 1.0HP output power for increased reliability and longer motor life. Pump has the ability to lift water up to Max. 26 feet of vertical height; Removes water up to 4000 gallons per hour at zero feet, 53 gallons per minute at 10 ft of discharge lift; Pumps up to 1-1/3" solid with ease.

【2 in 1! Manual/Automatic Switchable】This utility sump pump has the stable built-in float switch that can be switchable between manual mode and automatic mode according to actual needs. You can freely choose simple plug-in operation to remove water completely, or automatic on/off operation and just leave it at work.

【Powerful Water Pump】High performance PSC motor produces 1hp great power that ensures stronger power but lower power consumption, more energy-saving and quiet. Pump has the ability to lift water up to Max. 32 feet of vertical height. Max. Flow rate is 4000 gallons per hour at zero feet, 50 gallons per minute at 10 ft of discharge lift.

【Simple Plug-in Operation】Pump will be directly running when power on, removes water level down to 0.8”. Designed for quickly water draining in flooded house, basement, sumps, window wells, water tanks, pools, cisterns, hot tub spas, and flooding in low lying areas.

【Powerful Water Removal Pump】High performance PSC motor produces 1hp great power that ensures stronger power but lower consumption, more energy-saving and quiet. Pump removes water up to 4500 gallons per hour at zero feet, 60 gallons per minute at 10 ft of discharge lift. Handles water up to 1-1/3 inch solids.

【Full Stainless Steel Design】Assembled by integrated 304 stainless steel housing and pump base with better cooling ability for longer life. Full corrosion-resistant and reinforced construction with thermal overload protection for continuous duty use in water removal application.

Green Expert flush pump kit helps maintain and extend the lifespan of your tank-less water heater, this 6-in-1 set is designed to clean and descale most Tankless Water Heaters.

Full kit includes 1/4HP water pump, 3.5-gal pail with locked-in lid, two 6-foot 3/4" GHT color coded stainless steel hoses and open end wrench in one box with user guide.

【Powerful and Reliable Performance】Efficient PSC motor with thermal overload protection produces 1HP power for increased reliability and longer motor life. This item has the ability to lift water up to max. 150 feet of vertical height; Sprays water up to 875 gallons per hour at 30psi.

【Keep Your Garden Green】- Max.65 PSI water pressure with prefilter makes it perfect for irrigation or water transport in your garden or Farm after filtration. It's designed for home DIY watering purpose, you can use for ponds, pools, sprinkling systems, flow irrigation systems, gardening, rain barrels, shallow water wells for such agriculture settings.

【Powerful Water Removal Pump】High performance PSC motor with thermal overload protection produces 1.0HP output power for increased reliability and longer motor life. Pump removes water up to 4500 gallons per hour at zero feet, 60 gallons per minute at 10 ft of discharge lift, and has the ability to lift water up to Max. 28 feet of vertical height; Pumps both clean and dirty water up to 1-1/3 inch solid with ease.

【2 in 1! Manual/Automatic Adjustable】This utility water pump can be adjustable usage mode between manual and automatic on/off as you wish. You can use it in automatic on/off operation and just leave it at work, or you can freely choose the simple plug-in operation to remove water completely. With the lock design, floater can be fixed in up status that would keep pump always run, but you have to plug off manually in case of run dry.