Automotive From Five Star Mfg on Amazon

Built-in extra center support for loading the heaviest bikes.

Serrated crossrod design for awesome traction having twice as many crossrods than normal ATV ramps, for safe footing.

Designed for motorcycles and can also be used for loading ATV's and other equipment.

One year warranty. All aluminum 6005T5 alloy construction.

Serrated cross-rod design spaced 4" apart for excellent traction.

Aluminum "angle iron" welded to ramp ends assures a secure hold to trailer.

1,000 lb. 4 wheel distributed load capacity. Serrated cross-rod design spaced 5-1/2" apart for excellent traction.

This 6 ft folding ramp will work when loading snow blowers or small/midsize ATV's onto a 36" high tailgate. However you may prefer a 7 ft long ramp. A longer ramp will reduce the loading angle. This ramp is NOT recommended for loading motorcycles up the middle of the ramp. It's designed for 4 wheel and 2 wheel side by side loading (i.e. snow blower). For ramps with stronger center support, built to handle the weight of a large motorcycle riding up the center please look for the MCDR ramps.

This model is available in a similar more expensive model with 2X the number of crossrods for a better walking surface . SEARCH #400DR Ramp. The 400DR ramp has the cross-rods spaced 2-3/4" apart.

Built-in extra center support for loading the heaviest bikes.

Serrated crossrod design for awesome traction having twice as many crossrods than normal ATV ramps, for safe footing

Designed for motorcycles and can also be used for loading ATV's and other equipment.

Built-in extra center support for loading the heaviest bikes.

Serrated crossrod design for awesome traction having twice as many crossrods than normal ATV ramps, for safe footing.

Designed for motorcycles and can also be used for loading ATV's and other equipment.

Built-in extra center support for loading the heaviest bikes. Twice as many crossrods than normal ATV ramps, for safe footing

All aluminum, 6061 alloy construction. Lightweight, weighing only 42 lbs. Serrated crossrod design for awesome traction.

Designed for motorcycles and can also be used for loading ATV's.

The two (2) ramps combined have a 1,500 lb distributed loading capacity. Each ramp weighs 37 lbs.

The ramp comes with safety instructions and two safety straps to secure the ramp to the vehicle, thus preventing the ramp from kicking out while loading.

For easy storing the ramps fold in half to a little over 5 ft long.

1,000 lb. 4 wheel distributed load capacity. Serrated cross-rod design spaced 5-1/2" apart for excellent traction.

This 7 ft folding ramp will work when loading snow blowers or small/midsize ATV's onto a 36" high tailgate. Also available 6 ft long however a longer ramp will reduce the loading angle. This ramp is NOT recommended for loading motorcycles up the middle of the ramp. It's designed for 4 wheel and 2 wheel side by side loading (i.e. snow blower). For ramps with stronger center support, built to handle the weight of a large motorcycle riding up the center please look for the MCDR ramps.

This model is available in a similar more expensive model with 2X the number of crossrods for a better walking surface . SEARCH #740DR Ramp. The 740DR ramp has the cross-rods spaced 2-3/4" apart.