Patio, Lawn & Garden From DRELD on Amazon

【Compatiblity】The propane gas fire pit installation kit replacement is compatible with fire pit systems with low pressure less than 90,000btu, please do not use it in high pressure fire pit systems to avoid damaging your equipment. The Burner Kit Assembly is more sturdy and well constructed with continuous stable heat output, more durable and longer life, no need to replace your fire pit burner kit again and again.

【What You Get】1 x 12" Fire Ring Burner, 1 x 5.2 FT low pressure QCC inlet connection propane regulator hose, 1 x 5.1FT low pressure extension hose, 1 x 1/2" 90 Degree Elbow Air Mixer Valve Kit, 1 x 1/2" Brass Control Key valve, 1 x 3" key, 2 x 3/8" male flare adapter. Instead of investing in a whole new fire pit, this kit allowed you to save the extra cost.

> [COMPATIBLE]: The kit includes 12 Feet propane extension hose with Tank Adapter Converts POL LP Tank. Fits for heater, camp stove, portable grill, tabletop grill, camping, tailgating, heating needs or having an outdoor cookout.

> [FEATURE]: Equipped with 144 inch (12 feet) hose. You don't have to pull out your propane tank to read the scale on the pressure gauge. It is more convenient than ordinary propane tank pressure gauge. adapter allows you to use your larger propane tank with the new style regulator on the propane tank connection place.

[COMPATIBILITY]: Replacement for camp chef wood pellet grills. This temperature controller could be used widely, such as panel cook control, cool down cycle, succulent grilling, for safe and delicious.

[EASY OPERATION]: 175 to 400 degrees Fahrenheit. Eight Cook Temperature Settings. The knob is easy to turn, letting you keep your grill on by a quick adjustment. Allows you to dial in exactly the temperature you desire.

> [APPLICATION]: TT-30 outlet is usually installed on the household standby generator and RV power base. You can use this power cord to connect the generator to the emergency power transfer switch, the TT-30P locking plug end to the 3 Prong socket, and the L14-30R socket end to the 4 Prong power transfer switch socket.

> [ATTENTION]: Whether you are connected from the generator to the outside or the power box inside, we will protect you. 10 AWG 3 Conducor heavy duty cord made of copper with PVC in UL 62 standard for heat-proof insulation and antioxidants. A must if your power generator without L14-30R receptacle.

> Compatible with Green Mountain Grills Daniel Boone and Jim Bowie Pellet Grill. Note: Please check spade connector style before ordering. Light the hardwood and start your barbecue as easy as a flip switch, keep the fire on for a delicious taste with hardwood fuel.

> 200 Watt /120 volt AC, 3-1/2" (9cm) x 5/8" high density cartridge heating element, 24" (60cm) heat woven wire lead, c/w Quick Connector, when your current hot rod shortens or burns, this replacement part will ensure that your grill continues to function effectively.

> [PREMIUM QUALITY]: Strict quality control standards to Build and test. Pretty easy to snap into place. Not OEM but fits OEM Standards, the quality is equivalent to OEM requirements. Perfect match and Good Choice for Direct replacement of original parts. Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.Long service life.

> [FEATURE]: Hose Working Temperature Range: -22°F~122°F, 1/2” OD x 3/8” ID 24inch gas line stainless steel pipe in black coating with fittings. 3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Hose works great on grill and adapted grill with this hose to be able to have a regular grill next to a wooden cabinet this hose allowed for heat control. It solved LP gas line to gas log pipe fitting challenge.

>[PREMIUM MATERIAL]: High quality solid brass construction makes it corrosion resistant. 100 percent machined and all fits and seals. Works well, no leaks, high quality, no wrench required. Stamping fittings are available (hose and thread sides must be replaced).

>[CONNECTION]: Converts QCC1/Type 1 Male and POL Female Connection to 1/4'' Inch male pipe thread. makes changing propane tanks so much easier, solved propane flow issues. can hand screwed it to the gas tank easily without using any tool. No gas leak on either side. It is well-made, seems to last for a long time.

SIZE: 750 mm thermocouple with M8*1 threaded head. Bakelite knob OD 38mm, D shaft 6.1mm.

APPLICATION: The kit is suitable for low pressure repair control system for Gas Grill, Heater, Fire Pit, & Fireplace.

>[CONNECTION]: Converts QCC1/Type 1 Male and POL Female Connection to 1/4'' Inch male pipe thread. makes changing propane tanks so much easier, solved propane flow issues. can hand screwed it to the gas tank easily without using any tool. No gas leak on either side. It is well-made, seems to last for a long time.

>[THREAD]: One End Outer QCC1/Type Male Thread, Inner POL Female Thread. Other End 1/4 Inch Male Pipe Thread. The device is very useful, but be very careful not to overfill a disposable cylinder. Suitable for 2 - pound cylinder filling. Connectors have no built-in adjusters. There is a through hole.

> [COMPATIBLE]: Perfect refill adapter for filling 1 pound bottles from 20 pound propane tanks. Solid Brass Gas Refill Adapter.Great for 1LB Propane Cylinder. 1LB Propane Refill Adapter with control on-off valve. propane adapter can add another pound of propane gas to camp bottles and can easily connect to your larger tank without moving or carrying the smaller 1-pound propane tank.

> [USE ADVICE]: Leave the BBQ propane tank in the sun for as long as possible. Refrigerate 1 pound containers for 30 minutes or longer. Insert the tip of the adapter into the liquid filling connection of the barbecue can. Tighten the hose adapter by rotating it counterclockwise. Screw the 1-pound container into the adapter clockwise. Open the grill can valve. If you have problems reaching the valve, tilt the tank slightly to expose the barbecue valve. It takes about 10 to 15 minutes to fill.