Tools & Home Improvement From DEEWISH on Amazon

Radio Controlled Clock Movement Size：2.6*2.2*0.74 inch (66*56*19mm), Installation tips: 1. First fix the movement to the main body of the middle case. 2. Put the hour, minute, and seconds hands to 12 o'clock parallelly. 3. Pull out the positioning pin on the back of the movement. (Recommend saving the pin if you need to restart clock movement) 4. Install the battery, it automatically searches for local signals.

The Length Shaft of Movement : Total Shaft length : 0.67 inch(17mm) , Screw thread length : 0.34 inch (8.7mm)，Fit about 0.12-0.2 inches (3-5mm) thickness clock panel. With golden hex nut, golden metal washer, black rubber washer.

[What Will Receive]: you will get 4 pieces of 31 mm shaft length clock movements in 31 mm, 4 pieces of gasket tools, 4 pieces of metal hooks, and 4 types of walnut wood clock hands, only suitable for 12 to 14 inches clock, 19-21 mm clock face thickness.

[Durable Material]: the clock hand is made of quality walnut wood, which has nice wear-resistant and scratch-resistant, and can serve you for a long time; The movement is made of ABS material, which also has outstanding properties, such as wear resistance, oil resistance, and impact resistance

CLOCK MECHANISM REPLACEMENT - Movement shaft: 37/64 inch (14.5 mm), Thread length 6.7 mm(0.26 inch). Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches) Hour hand length: approx. 80 mm (3.15 inches) Minute hand length: approx. 120 mm (4.7 inches) Second-hand length: approx. 100 mm (3.9 inches)

BATTERY OPERATED CLOCK MECHANISM - Jumping clock movement, suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel

[What Will Receive]: you will get 4 pieces of 31 mm shaft length clock movements in 31 mm, 4 pieces of gasket tools, 4 pieces of metal hooks, and 4 types of walnut wood clock hands, only suitable for 12 to 14 inches clock, 19-21 mm clock face thickness.

[Durable Material]: the clock hand is made of quality walnut wood, which has nice wear-resistant and scratch-resistant, and can serve you for a long time; The movement is made of ABS material, which also has outstanding properties, such as wear resistance, oil resistance, and impact resistance

Size：66*56*19mm, 【Installation tips】: 1. First fix the movement to the main body of the middle case. 2. The hour and minute hands are seconds to install the pointer for the standard 12, 3. Pull out the positioning pin on the back of the movement. 4. Install the battery, it automatically searches for local signals

The shaft Length of Movement : Shaft length : 17 mm , Screw thread length : 8.7mm，Fit about 6 mm thickness clock panel. With golden hex nut, golden metal washer, black rubber washer.