Top 15 Comgrow Products On Amazon (Verified to buy)
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
Comgrow
Ender 3
16.14 x 16.54 x 18.31 inches
14.6 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and Branded Power Supply, FDM 3D Printers for DIY Home and School Printing Size 8.66x8.66x9.84 inch
Comgrow
Ender-3 Pro
17.32 x 16.54 x 18.31 inches
15.39 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
| Siderui | - | ✅ | ✅ | ✅ |
Features
REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.SAFE POWER SUPPLY: Ender 3 Pro comes with a branded power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Comgrow
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
ATTENTION BEFORE USE：Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
Official Creality Ender 3 V2 Upgraded 3D Printer with Silent Motherboard Branded Power Supply Carborundum Glass Platform Resume Printing Function, DIY FDM 3D Printers Build Size 8.66x8.66x9.84 inch
Comgrow
US1-Ender3 V2-FBA
18.5039 x 18.7008 x 24.4094 inches
17.19 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.UL Certified Branded Power Supply: Equipped with branded power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades
Comgrow
ENDER 3-TAOJIAN
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Wolias | - | ✅ | ✅ | ✅ |
Features
3D Printer Extruder - Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders.100% Original Capricorn XS Bowden Tube for 1.75mm filament - Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament.
PLA 3D Printer Filament, 3D Printer PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool PLA Black
Comgrow
CA1F-AQ-PLA-BK 1KG
2.2046 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
High-quality PLA filament: The recommended nozzle temperature is about 210-220°C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.
3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder
Comgrow
1.75PLA-US1-1
3.3069 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Comgrow Creality 4Pcs Metal Leveling Nuts and Springs Upgraded Set for Ender 3/3 Pro/3 V2/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro Ender 5 Plus/CR 10 Series 3D Printer Bed Staying Level
Comgrow
PTTPLM
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Wolias | - | ✅ | ✅ | ✅ |
Features
NOTE - The length of springs are about 25mm, which is slightly longer than the ender 3 series printers(Including ender 3/ender 3 pro/ender 3 v2). The springs need to cut them shorter than the original ones in order to adapt them to the printer or adjust the hot bed to be higher to fit the springs.Suitable for - Upgraded aluminum hand twist level nut are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.
Top 9
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer
Comgrow
CG-FS
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
Fit for: Creality Ender 3, Ender 3X, Ender 3 ProMaterials: Plastic
Comgrow PLA 3D Printer Filament, 3D Printer Filament 1.75mm, 1kg Spool Filament (2.2lbs), Dimensional Accuracy +/- 0.03mm, PLA Black, fit Most FDM 3D Printers
Comgrow
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
The PLA filaments has 1.75 mm diameter with tolerance of ±0.02 mm conform to a standard tolerance. 1 Kg (2.2 lbs) net weight. Compatible with any 3D printer that use 1.75mm diameter filament. (Tips: After printing, please pass one end of the wire into the fixing hole to avoid the filament being entangled due to the loosening of the wire coil.)Comgrow black PLA is easy to print with. Comes neatly packaged in vacuum-sealed bags with desiccant packets to avoid moisture. The spools are very neatly wound, assuring clog, bubble & tangle-free prints.
Top 11
5PCS Creality 3D Printer NTC Thermistor 100K, NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Voxelab Aquila, XH2.54-2P Connector (1m/39.4inch)
Comgrow
3D-RMDZ-5PCS
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors.Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
Top 12
PEI Magnetic Flexible Heated Bed 310x320mm Spring Steel Plate for Creality CR-10 V3/CR-10 V2/Ender 3 Max/Ender 3 Max Neo/CR-10S Pro V2/CR-10S/CR-X/SV04
Comgrow
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
Flexible, removable, can stick to magnetics very well. High strength and heat resistance. (Note: Please remove the transparent protective film on the surface before use).Compatible with PLA、PETG、PEEK、ABS and any other filaments.
Creality Fireproof and Dustproof 3D Printer Warm Enclosure Mini 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro, Constant Temperature Protective Cover Room
Comgrow
22.2441 x 26.9685 x 17.5197 inches
5.3572 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
Constant Temperature: Creality 3D Printer Tent Keep a constant temperature printing environment, reducing the bad impact on printed models when low-temperature weather, helps filaments with bed adhesion at high temperatures, improving printing stability.Inner Size: 17.5*22.2*26.9 inch. Compatible with Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 5 Pro.A good mate for your 3D printing.
Top 14
CREALITY Official Ender 3 V2 3D Printer with MeanWell Power Supply Upgraded Version of Ender 3 Pro Silent Motherboard Mainboard for Carborundum Glass Platform LCD Screen Printing Size 8.6x8.6x9.8in
Comgrow
Ender 3V2
17.3228 x 17.3228 x 18.1102 Inches
17.637 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| CREALITY | - | ✅ | ✅ | ✅ |
Features
V4.2.2 UPDATED SILENT MOTHERBOARD: Creality Ender 3 V2 3D printer update the motherboard with silent TMC2208 stepper drivers: Compared to the Ender 3 and Ender 3 pro, a V2 design that delivers users out-of-the-box experience and silence-oriented upgrades,It has been built to offer a beefy level of power, featuring an ARM Cortex-M3 STM32F103 CPU and a TMC2208 stepper driversNEW UI & 4.3 INCH COLOR SCREEN: The ender-3 v2 use new display equipped with UI LCD screen, user experience greatly upgrades with the newly designed operation UI system, convenient disassembly and simple operation.
Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling Kit PC Spring Steel Platform Full-Metal Extruder, 95% Pre-Installed 3D Printers with Resume Printing and Model Preview Function
Comgrow
Ender 3 V2 Neo
17.24 x 16.7 x 18.58 inches
17.2 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| comgrow | 5,776 | ✅ | ✅ | ✅ |
Features
1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to users and beginners in assembly process, which will save much time. It is convenient for customers to install it in quick way, more efficient.2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.
Our Comgrow Review
Comgrow products on Amazon (November 2024)
What to buy from Comgrow?
Comgrow sell products mainly in the Industrial & Scientific category.
Its popular products on Amazon include PLA 3D Printing Filament,1.75 mm 3D Printing Filament And PETG 3D Printing Filament.
If you intend to buy any of these products, then you can find them easily on Amazon.
Featured Reviews Related to Comgrow
704 Reviews Analyzed
127,847 Reviews Analyzed
8,569 Reviews Analyzed
32,073 Reviews Analyzed
31,722 Reviews Analyzed
34,438 Reviews Analyzed
53,286 Reviews Analyzed
41,822 Reviews Analyzed
26,893 Reviews Analyzed
Comgrow Pricing
The brand has over 113 products listed on Amazon with a price range of $8.99 to $1,199.00 form our picks.
Currently, the average price of their product is $218.47 which is considered affordable. You can make your choice from the list of products offered by the Comgrow.
Is Comgrow a good brand?
A brand is an essential factor when making a purchase. What do we think about the Comgrow? Well, according to the information available on Amazon, Comgrow products are sold by comgrow.
The seller has received about 929 feedbacks from buyers with an average start rating of 4.9. With a rating as this from the number of feedbacks, we can conclude that Comgrow is the brand is exceptional good, and their products are highly recommended as most consumers were delighted making use of the products from Comgrow.
Can I know who the owner of Comgrow is?
Comgrow is selling on Amazon's North America Marketplaces. You can find out the actual owner of the brand at https://www.uspto.gov/trademarks/search.
From there, you can tell whether Amazon owns the brand or not. If you want to buy Amazon branded products, you can go here, and list some of their top brands. Amazon owns 100 private-label brands that operate in different markets.
Methodology
How We Evaluated Comgrow Products
We are crawling & scraping a large amount of data from 113 Comgrow products and a countless number of reviews, you can gain valuable insights to enhance your understanding of various aspects related to Comgrow, and you can use those data to help you make informed buying PLA 3D Printing Filament,1.75 mm 3D Printing Filament And PETG 3D Printing Filament decisions. Those recommend the 15 best products from Comgrow based on thorough analysis and research by our CherryPicks-AI ranking system.
Why create this buying guide?
Our brand guide is designed to provide up-to-date & unbiased information about Comgrow products. Our goal is to empower you with data-driven insights, enabling you to make better shopping decisions efficiently to save time. We prioritize earning your trust by providing reliable information and guidance.
Top 6 Comgrow Sellers: CPR Seller Rank List
CPR sellers rank is based on CherryPicks-AI bestselling ranking system that helps us analyze each seller's sales trends. The List of top seller ranks is our in-house data, essential for our product ranking to help you make the right shopping choice.
- 1. comgrow : 929 Yearly Feedback , Avg. Ratings 4.9
- 2. Wolias : 290 Yearly Feedback , Avg. Ratings 4.9
- 3. CREALITY : 264 Yearly Feedback , Avg. Ratings 4.9
- 4. hubangus : 116 Yearly Feedback , Avg. Ratings 4.7
- 5. Siderui : 40 Yearly Feedback , Avg. Ratings 5.0
- 6. YJHUS : 13 Yearly Feedback , Avg. Ratings 4.5
| Rank | Name | Yearly Feedbacks | Avg. Ratings |
|---|---|---|---|
| 🥇 | comgrow | 929 | 4.9 |
| 🥈 | Wolias | 290 | 4.9 |
| 🥉 | CREALITY | 264 | 4.9 |
| 4 | hubangus | 116 | 4.7 |
| 5 | Siderui | 40 | 5.0 |
| 6 | YJHUS | 13 | 4.5 |