Automotive From 100Tech on Amazon

<b>［Easy to install and Calibrate］</b>100TECH Boat Water Gauge is Designed for the One Who is Looking For a a Simple Solution to Measure the Amount of Water in The Tank But Un-sure of The Type Sensor That Was Installed Into Boat/Vehicles. It Can be Adjusted by Simply Pressing a Button.

<b>［Easily Understood Wiring Instructions］</b>Easy-to-Read Lighted Dial, The Installation Takes less than 15 Minutes. Install diameter: Φ52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine].

<b>100TECH Stainless Steel Fuel Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. </b> <br> Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.<br>

The Fuel/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4"-24", Please Contact us Directly for More Information.<br>

<b>［Adjustable and Wide Application］</b>100TECH Fuel Level Gauge is Designed to Measure & Display the Amount of gas or Fuel in Your Boat or Vehicle's Gas Tank. Signal Input : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm.<br>

<b>［A Fine Replacement Fuel Guage］</b> The Needle is Smooth Sweeping and Surpasses the Original Version in the Boat(the Needle doesn't Bounce all over the Place as the Boat is Underway or in Rough Sea Conditions).<br>

Comes with 5 stainless steel M5 screws and 1 SAE 5-hole cork washer (NBR)

2. It's designed for top installation in plastic or metal fuel tanks of all types of Marine Vessels or the Vehicles

1、<b>［Easy to Mount, Convenient to Wire with the Plug ］</b>Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow and the Installation Takes Less than 10 Minutes. <br>

2、<b>［A Fine replacement fuel guage］ </b>The Needle is Smooth Sweeping and Surpasses the Original Version in the Boat(the Needle doesn't Bounce all over the Place as the Boat is Underway or in Rough Sea Conditions). <br>It Allows the User to Remotely Monitor the Liquid Level in the Tank. This Level Gauge will Work with any Level Sender with American Standard (240-33 ohms) Resistive Output(It Can Also be Used on Truck/Car to Match Fuel Sending Unit for Diesel Oil/ Gasoline Level Monitoring.<br>

100TECH Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V

［GOOD Readability, Great Visual Contrast on Gauge Face.］ The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.

<b>[100TECH Fuel Sending Unit Features and Benefits] Made With OKI Reed Switch(Imported from Japan). SS Construction,SAE 5 hole Mounting Pattern, It's The Direct Replacement for OEM's Arm-Type Fuel Sender. </b> <br> The Advantage of This Sending Unit Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability.<br>

<b>【 Gasket and Mounting Screws of Boat Fule Sending Unit 】</b><b>"Easy to install, easy hookup!"</b> <br> The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow. <br><b>Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal .</b> <br>

100TECH Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V

［GOOD Readability, Great Visual Contrast on Gauge Face.］ The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.

<b>[100TECH Fuel Sending Unit Features and Benefits] Made With OKI Reed Switch(Imported from Japan). SS Construction,SAE 5 hole Mounting Pattern, It's The Direct Replacement for OEM's Arm-Type Fuel Sender. </b> <br> The Advantage of This Sending Unit Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability.<br>

<b>【 Gasket and Mounting Screws of Boat Fule Sending Unit 】</b><b>"Easy to install, easy hookup!"</b> <br> The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow. <br><b>Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal .</b> <br>