The use of speed-compatible devices in gaming minimizes lag and maximizes fun. A 144Hz monitor is ideal for gaming since it refreshes the screen 144 times per second, significantly improving the visual experience. However, if the console is incompatible with the monitor's refresh rate, it may impact your gaming experience. In light of using a PS5 and a 144Hz display, the question is: Does PS5 support a 144Hz refresh rate screen? Note that the PS5's current HDMI 2.1 functionality allows for a maximum of 10K at 120Hz and 4K at 240Hz.
To address your concern, Does PS5 support a 144Hz Monitor? In this article, let's look at the PS5's display features and how to hook it up to a 144Hz screen.
Table Of Contents
The PS5 HDMI 2.1 Specifications
Each new console has an updated HDMI interface, and the PS5 is no exception. The PS5's "Newer Gen Dedicated Graphics Card device with HDMI 2.1 port version" allows resolutions of up to 10K at 120Hz and 4K at 240Hz. However, the PS5's HDMI 2.1 interface is limited; thus, it can't handle all the video resolutions and refresh rates that HDMI 2.1 can. Here is a list of all solutions supported by the PS5's HDMI output:
- Full High-Definition with a refresh rate of 60 frames per second.
- High-definition video at a frame rate of 120 frames per second.
- 720p resolution.
- 4K resolution at 60Hz.
- 4K resolution at 120Hz.
Remember that the PS5 utilizes HDMI 2.1, which enables 4K resolution up to 240 Hz. However, the PlayStation 5's HDMI 2.1 support is limited to 120 Hz.
Does PS5 support a 144Hz monitor?
As noted above, the PS5 HDMI 2.1 display capabilities are limited. Even though the HDMI 2.1 interface can support 4K@240 and all other resolutions and their refresh rates, the PlayStation 5 cannot only go up to 120 Hz. The PlayStation 5 has only the power to produce a maximum of 120 Hz rather than the expected 144 frames per second monitor. However, if you primarily use a 144Hz display, the combination will still work fine at the reduced 120FPS cap. In most cases, everything will work perfectly, although you may encounter lag on some games.
How to Run PS5 on a 144Hz Refresh Rate Screen?
To run PS5 12OHz on a 144Hz display, here are the things to consider:
Use an Original HDMI 2.1 Cable:
The HDMI cable you use is essential if you want 120 frames per second on a 144Hz screen. Even though the PlayStation 5 has some restrictions and your TV may exceed the maximum requirements, the version of the HDMI cable in use will determine the display signal strength. It's important to remember that HDMI cables and the video signals they transport vary. For that reason, we have included the necessary HDMI cable for each resolution below:
- The PlayStation 5 requires an HDMI 2.1 cable (Ultra-High-Speed Cable) to function at 4K @ 120Hz.
- The PlayStation 5 requires an HDMI 2.0 cable (Premium High Speed) to run at 4K at 60Hz.
- A High-Speed Cable (HDMI 1.4) is required to run the PS5 at Full HD @ 120Hz.
- You'll need an HDMI 1.4 cable (High-Speed Cable) to run a PS5 at Full HD @ 60Hz.
Therefore, with a suitable HDMI 2.1 cable, you can run the PS5 120Hz on a 144Hz monitor.
Make The Right Settings on PS5:
Even with the correct HDMI 2.1 cable, your PS5 may not support 120Hz on a 144Hz display if the settings are incorrect. A PlayStation 5 set at a maximum refresh rate of 60 fps will not operate with a 144 fps monitor unless the display settings are set to 120Hz. To adjust the setting on PS5, do this:
Go to PS5 video setting options, and enable "Performance Mode" rather than "Resolution Mode" or "Automatic". Performance Mode allows 120Hz (displaying 120 FPS) and grants access to the 120FPS game mode.
Check That the Game you're using supports 120 FPS:
If you've already tried everything mentioned above and the problem persists, the game may be at fault. Make sure the game supports 120 FPS on the PS5 before you set the frame rate to that.
Considering that the PS5 Supports a 144Hz Refresh Rate when set to 120Hz, what are the advantages of using a high-performance gaming screen?
Advantages of Using 144Hz Monitor on PS5
High-quality 144Hz displays effectively mitigate frame stuttering, motion blur, screen tearing, and ghosting problems, enhancing the visual experience in gaming and movie contexts. These monitors offer a gaming experience characterized by a higher level of smoothness and continuity. The 144Hz monitors benefit gamers and creative workers needing enhanced display performance.
Frequently Asked Questions
Q. What display options should I choose if I want my PS5 to support 144Hz?
Ensure your display settings are set up correctly to allow 144Hz on your PS5. On your PS5, pick the "Screen and Video" option under Settings. Next, choose "Video Output" and "Video Output Information."
This will display the highest refresh rate your monitor is capable of. You can choose 144Hz from the "Refresh Rate" drop-down menu if your monitor supports it.
Q. What kind of HDMI cable should I use if I want my PS5 to support 144Hz?
Use an HDMI 2.1 cable if you want your PS5 to support 144Hz. This kind of cable is necessary to transfer the greater bandwidth required for 144Hz. If you're unsure if your cable is compatible with HDMI 2.1, look at the package or visit the manufacturer's website.
Conclusion
Do you long for a more pleasurable experience while playing games? Then you may have wondered, Does PS5 Support a 144Hz Refresh Rate? According to Sony's specifications, the PS5 is incompatible with a 144 Hz display. The PS5's HDMI 2.1 port limitation is to blame for this, despite the interface's ability to handle 10k resolution at 240Hz. However, if you have a 144Hz monitor, you can hook up your PS5 without worries. All you need to do is use a suitable HDMI 2.1 cable, set the PS5 to Performance Mode, and ensure the game can run at 120 frames per second.