Industrial & Scientific From Kiro&Seeu on Amazon

Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly used to adjust backlight and contrast.

Application: LCD module is applied to display characters, letters, numbers, real time clock and temperatur.

1602 LCD display with I2C serial interface is compatible with for Arduino and Raspberry pi, display function: LCD display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on.

Inlet Module: Standard IEC320 C14, Installed Fuse: 10A, Rocker Switch: Illuminated to show power status,6A 250V AC 10A 125V AC

Widely used inside computer, home appliance or DIY small project on power supply distribution and control

Total Size : 5.8 x 4.9 x 3.4cm / 2.3" x 1.9" x 1.3"(L x W x H);PANEL CUT-OUT:28.4mm*48.4mm

Removes 4, 6, 8 and 12mm Insulation.Can adjust stripping depth according to different wire diameter.

Use easily, lock the tool over the cable, spin clockwise, then pull off the unwanted portion.

Size:10x1.8x3cm/3.94x0.71x1.18 Inch(LxWxH).Package Include:1PCS.

Microwave radar sensor will sense motion through most anything. The more shielding there is, the less detection range you get. I can detect motion through glass, drywall walls, ceilings and floors. It is very sensitive. You might have to filter the power supply. Tutorials contact us.

It can work with (for) arduino/nodemcu/wemos etc.; It can detect human, cat, rat, water. Works with Arduino and Nodemcu Document link, please contact us.

high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range ,it is widely used in various kinds of human body induction lighting and alarm and so on

E buckle ring and rubber washer to quiet the operation of the solenoid valve.

Low friction ensures high efficiency and long life.

Simple and reliable structure design.

Working current: 4.3-4.6 A (rated 12 v), Imax: 4.5A

Rated voltage: DC12V (Vmax: 15 v starting current 5.8 A)

Refrigeration power: Qcmax 50-60W

In operation, the desired filter is dynamically selected through two programmable pins. The sensor's typical output frequency range is from 2 Hz to 500 kHz, and the user can also select 100%, 20%, or 2% of the output scaling factor or power shutdown mode via two programmable pins. The output scaling factor allows the sensor's output to adapt to different measurement ranges, improving its adaptability.

For example, when using a low-speed frequency counter, you can select a small scaling value to match the output frequency of the TCS230 to the counter.