Automotive From Flying Horse on Amazon

DESIGNED FOR HP ENGINES: High performance engines need high performance parts that can handle all that power, and if you’re running a high performance motor you’re going to need these Heavy Duty High Temperature Clutch Friction Pads

LONG LASTING: These upgraded clutch pads will have your 2-stroke engine engaging and disengaging even better than before without all that slipping your stock pads give you.

The Sunlite 26'' Rear Brake Kit includes everything you need to install and operate a rear brake for your beach cruiser (also works for mountain bikes)

This brake works well with cruisers and most mountain bikes, and includes brake pads, a brake lever, brake cable, and brake caliper

The 80cc Angle Fire Cylinder Body Cap is an angle fire head cap made for 66/80cc 2-stroke bicycle engine kits

To install simply unbolt the existing studs, lift off the cap, replace the head gasket (if necessary), torque down the head, and you're ready to run

The 49cc Flying Horse 5G 4-Stroke Motor Only is the bare motor for this engine, and replaces your Huasheng 142F motor

This motor includes all internal parts for this motor. You will need to purchase the rest of the parts in order to complete this build (including the transmission, magneto flyweight, carburetor, pull start, and more)

The Clutch Cable is designed for 2-stroke bike engine kits across the board and is about 60" in length

Installation couldn't be easier: just feed the bead in to the clutch lever (like you would with a bicycle brake cable and lever), send the cable through the clutch screw base and clutch arm, set the tension and lock it with a clutch wire clip, zip tie as needed, and you're ready to ride

BOOST PERFORMANCE: The Flying Horse High Performance two stroke Three Prong Spark plug has three electrode grounds providing 3x the spark of a traditional single prong spark plug. The produces a stronger spark which helps the engine run more efficiently utilizing more of the fuel in the combustion chamber. This helps keep your engine clean of unburnt fuel and can extend the life of your engine.

RELIABLE SPARK: Not only do these spark plugs increase torque and speed but it also helps start your engine. With a larger spark, it helps assist cold engines start up faster.

The Sunlite Single Speed 22 Tooth Sprocket will allow your freewheel hub to pick up some speed

Installation may take some experience in installing sprockets on bicycle wheels, as you will need to thread this sprocket on to the hub and assure it is secured as to not fall off during your ride

The Sprocket Clamp Assembly will mount the drive sprocket of any 2-stroke or 4-stroke 48cc or 66/80cc bike engine kit to the wheel of a bicycle, turning your wheel in to a motorized bike wheel

Installation may require extra tools: Take one of the rubber gaskets and slit one side. Open it the gasket and mount it around the hub of your wheel (inside of the wheel). Mount the second gasket on to the outside of the wheel, and your sprocket on top of the gasket. Place your screws through the sprocket and the gaskets, and mount the metal plates on to the screws on top of the rubber gasket around your hub. Screw the nuts for the assembly down evenly, and you're ready to ride

DIRECT REPLACEMENT: The Flying Horse Motorized Bicycle Clutch Handle is used on most standard two stroke motorized bicycle engine kits and is used to engage and disengage your engine.

SPRING LOADED LOCK: This clutch lever features a spring loaded button that will lock your clutch lever in the disengaged position. That way when you choose to ride your bike with out the engine you no longer have to hold the clutch lever pulled in

This 2-Stroke Clutch Spring is to help disengage and engage your motor's clutch plate, whether you run a 66/80cc or a 48cc bike engine

Installation is a breeze: simply take your clutch plate off, place the clutch spring in the center of your bevel wheel, re-install the clutch plate, and your engine is ready to rock